CC2651P3数据手册RF/IF射频/中频RFID的射频收发器IC规格书PDF

特性 Features

Wireless microcontroller
• Powerful 48-MHz Arm Cortex-M4 processor
• 352KB flash program memory
• 32KB of ultra-low leakage SRAM
• 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
• Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
• Supports over-the-air upgrade (OTA)
Low power consumption
• MCU consumption:
• 2.91 mA active mode, CoreMark
• 61 µA/MHz running CoreMark
• 0.8 µA standby mode, RTC, 32KB RAM
• 0.1 µA shutdown mode, wake-up on pin

• Radio Consumption:
• 6.4 mA RX
• 7.1 mA TX at 0 dBm
• 9.5 mA TX at +5 dBm
• 22 mA TX at +10 dBm
• 101 mA TX at +20 dBm (7x7 package)

Wireless protocol support
• Zigbee®
• Bluetooth® 5.2 Low Energy
• SimpleLink™ TI 15.4-stack
• Proprietary systems
High performance radio
• -104 dBm for Bluetooth® Low Energy 125-kbps
• Output power up to +20 dBm with temperature compensation
Regulatory compliance
• Suitable for systems targeting compliance with these standards:
• ETSI EN 300 328, EN 300 440 Cat. 2 and 3
• FCC CFR47 Part 15
• ARIB STD-T66

MCU peripherals
• Digital peripherals can be routed to any GPIO
• Four 32-bit or eight 16-bit general-purpose timers
• 12-bit ADC, 200 kSamples/s, 8 channels
• 8-bit DAC
• Analog Comparator
• UART, SSI, I2C, I2S
• Real-time clock (RTC)
• Integrated temperature and battery monitor
Security enablers
• AES 128-bit cryptographic accelerator
• True random number generator (TRNG)
• Additional cryptography drivers available in Software Development Kit (SDK)
Development tools and software
• LP-CC2651P3 Development Kit
• SimpleLink™ CC13xx and CC26xx Software Development Kit (SDK)
• SmartRF™ Studio for simple radio configuration
• SysConfig system configuration tool
Operating range
• On-chip buck DC/DC converter
• 1.8-V to 3.8-V single supply voltage
• -40 to +105°C
Package
• 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
• 5-mm × 5-mm RKP VQFN40 (18 GPIOs)
• RoHS-compliant package