CC2642R-Q1数据手册TI中文资料规格书

描述 Description

The SimpleLink™ CC2642R-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targetingBluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless communication in applications such as car access including passive entry passive start (PEPS) and remote keyless entry (RKE), battery management systems (BMS), car sharing, piloted parking, cable replacement, and smartphone connectivity. The highlighted features of this device include:Support for Bluetooth ® 5.1 features: LE Coded PHYs (Long Range), LE 2-Mbit PHY (High Speed), Advertising Extensions, Multiple Advertisement Sets, CSA#2, as well as backwards compatibility and support for key features from the Bluetooth ® 5 and earlier Low Energy specifications. Fully-qualified Bluetooth ® 5.1 software protocol stack included with the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK), which enables Angle of Arrival (AoA). Longer battery life wireless applications with low standby current of 0.94 µA with full RAM retention. AEC-Q100 qualified at the Grade 2 temperature range (–40 °C to +105 °C) and is offered in a 7-mm x 7-mm VQFN package with wettable flanks. Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards, such as real-time localization (RTLS) technologies. Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-105 dBm for 125-kbps LE Coded PHY).

The CC2642R-Q1 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee®, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

特性 Features

• Qualified for automotive applicationsg
• AEC-Q100 qualified with the following results:
• Device temperature grade 2: –40 °C to +105 °C ambient operating temperature range
• Device HBM ESD Classification Level 2
• Device CDM ESD Classification Level C3

• Microcontroller
• Powerful 48-MHz Arm Cortex-M4F processor
• EEMBC CoreMark score: 148
• Clock speed up to 48 MHz
• 352KB of in-system Programmable Flash
• 256KB of ROM for protocols and library functions
• 8KB of cache SRAM
• 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
• 2-pin cJTAG and JTAG debugging
• Supports Over-the-Air upgrade (OTA)

• RoHS-compliant package
• 7-mm x 7-mm VQFN48 with wettable flanks

• Radio section
• 2.4 GHz RF transceiver compatible with Bluetooth 5.1 low energy and earlier specifications
• Excellent receiver sensitivity: –105 dBm for Bluetooth 125-kbps (LE coded PHY) –97 dBm for 1-Mbps PHY
• Output power up to +5 dBm with temperature compensation
• Suitable for systems targeting compliance with worldwide radio frequency regulations:
• EN 300 328 (Europe)
• EN 300 440 Category 2 (Europe)
• FCC CFR47 Part 15 (US)
• ARIB STD-T66 (Japan)


• Low power
• Wide supply voltage range: 1.8 V to 3.63 V
• Active mode RX: 6.9 mA
• Active mode TX 0 dBm: 7.3 mA
• Active mode TX 5 dBm: 9.6 mA
• Active mode MCU 48 MHz (CoreMark): 3.4 mA (71 µA/MHz)
• Sensor controller, low-power mode, 2 MHz, running infinite loop: 31.9 µA
• Sensor controller, active mode, 24 MHz, running infinite loop: 808.5 µA
• Standby: 0.94 µA (RTC on, 80KB RAM and CPU retention)
• Shutdown: 150 nA (wakeup on external events)

• Peripherals
• 31 GPIOs, digital peripherals can be routed to any GPIO
• 4 × 32-bit or 8 × 16-bit general-purpose timers
• 12-bit ADC, 200 kSamples/s, 8 channels
• 2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)
• Programmable current source
• 2× UART
• 2× SSI (SPI, MICROWIRE, TI)
• I2C
• I2S
• Real-time clock (RTC)
• AES 128-bit and 256-bit crypto accelerator
• ECC and RSA public key hardware accelerator
• SHA2 accelerator (full suite up to SHA-512)
• True random number generator (TRNG)
• Capacitive sensing, up to 8 channels
• Integrated temperature and battery monitor

• External system
• On-chip buck DC/DC converter

• Ultra-low power sensor controller with 4KB of SRAM
• Operation independent from system CPU
• Sample, store, and process sensor data
• Fast wake-up for low-power operation

• TI-RTOS, drivers, bootloader, Bluetooth 5.1 Low Energy controller in ROM for optimized application size
• Development Tools and Software
• CC26x2R1 LaunchPad™ Development Kit
• SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK)
• SmartRF™ Studio for simple radio configuration
• Sensor Controller Studio for building low-power sensing applications
• Automotive Bluetooth Low Energy car access satellite node reference design
• Bluetooth Angle of Arrival (AoA) Antenna Design Application Report