丝印：B3；Package：SC-70；Dual high-speed switching diode

Features and benefits  High switching speed: trr  4 ns  Repetitive peak reverse voltage: VRRM  85 V  Reverse voltage: VR  80 V  AEC-Q101 qualified  Low capacitance: Cd  1.5 pF  Repetitive peak forward current: IFRM  500 mA  Very small SMD plastic package

文件：810.38 Kbytes 页数：11 Pages

NEXPERIA

安世

丝印：B3；Package：SOT-23；Switching Diode

Features ● Small Package ● Low forward voltage :VF(3) = 0.9 V(Typ.) ● Fast Reverse Recovery Time :trr = 1.6 ns(Typ.) ● Small Total Capacitance :CT = 0.9pF(Typ.)

文件：463.3 Kbytes 页数：3 Pages

YFWDIODE

佑风微

丝印：B3；Package：SOT-23；Surface mount switching diode

FEATURES ● Low forward voltage VF=0.9V(typ). ● Small total capacitance. ● Fast reverse recovery time:trr=1.6ns(typ). APPLICATIONS ● High speed switching application.

文件：280.68 Kbytes 页数：3 Pages

BILIN

银河微电

丝印：B3；Package：SSOP5；Bipolar Voltage Detector ICs

Description The BD47□□G Series is a reset IC that was developed to prevent system errors at transient state when the power of CPU or logic circuit switches ON/OFF or momentary shut down. These ICs consist of three terminals (power supply, GND and reset output) to detect power supply voltages and

文件：431.11 Kbytes 页数：13 Pages

ROHM

罗姆

丝印：B3；Package：EMT6；General purpose (dual digital transistors)

Features 1) Two DTA143T chips in a EMT6 or UMT6 or SMT6 package. 2) Mounting possible with EMT3 or UMT3 or SMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. Application INVERTER, INTERFACE, DR

文件：57.81 Kbytes 页数：2 Pages

ROHM

罗姆

丝印：B3；Package：SOT-26；PNP -100mA -50V Complex Digital Transistors

General purpose (dual digital transistors) Features 1) Two DTA114T chips in a EMT or UMT or SMT package.

文件：447.56 Kbytes 页数：7 Pages

ROHM

罗姆

丝印：B3；Package：SOT-26；General purpose (dual digital transistors)

Features 1) Two DTA143T chips in a EMT6 or UMT6 or SMT6 package. 2) Mounting possible with EMT3 or UMT3 or SMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. Application INVERTER, INTERFACE, DR

文件：57.81 Kbytes 页数：2 Pages

ROHM

罗姆

丝印：B3；Package：X2SON；TLV707, TLV707P 200-mA, Low-IQ, Low-Noise, Low-Dropout Regulator for Portable Devices

1 Features • Typical accuracy: 0.5 • Supports 200-mA output • Low IQ: 25 μA • Fixed-output voltage combinations possible from 0.85 V to 5.0 V(1) • High PSRR: – 70 dB at 100 Hz – 50 dB at 1 MHz • Stable with effective capacitance of 0.1 μF(2) • Thermal shutdown and overcurrent protection

文件：1.46906 Mbytes 页数：44 Pages

TI

德州仪器

丝印：B3；Package：X2SON；TLV707, TLV707P 200-mA, Low-IQ, Low-Noise, Low-Dropout Regulator for Portable Devices

1 Features • Typical accuracy: 0.5 • Supports 200-mA output • Low IQ: 25 μA • Fixed-output voltage combinations possible from 0.85 V to 5.0 V(1) • High PSRR: – 70 dB at 100 Hz – 50 dB at 1 MHz • Stable with effective capacitance of 0.1 μF(2) • Thermal shutdown and overcurrent protection

文件：1.46906 Mbytes 页数：44 Pages

TI

德州仪器

丝印：B3；Package：SOT-363；General purpose (dual digital transistors)

Features 1) Two DTA143T chips in a EMT6 or UMT6 or SMT6 package. 2) Mounting possible with EMT3 or UMT3 or SMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. Application INVERTER, INTERFACE, DR

文件：57.81 Kbytes 页数：2 Pages

ROHM

罗姆