MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH

Description AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery powered equipment such cellular phones, PDAs and portable PCs. Based on two Hall-Effect plates and a chopper stabilized architecture the AH180 provides a reliable solution over the whole operating

文件：148.44 Kbytes 页数：9 Pages

DIODES

美台半导体

MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH

Description AH180 is a micro-power Omnipolar Hall-Effect switch designed for portable and battery powered equipment such cellular phones, PDAs and portable PCs. Based on two Hall-Effect plates and a chopper stabilized architecture the AH180 provides a reliable solution over the whole operating

文件：148.44 Kbytes 页数：9 Pages

DIODES

美台半导体

HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH

Description The AH1812 is a high sensitivity micropower Omnipolar Hall effect switch IC with an open drain output. Designed for portable and battery powered equipment such as cellular phones and portable PCs, the average supply current is only 4.3µA at 1.85V. To support potable equipment the AH18

文件：300.72 Kbytes 页数：8 Pages

DIODES

美台半导体

HIGH SENSIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH

Description The AH1812 is a high sensitivity micropower Omnipolar Hall effect switch IC with an open drain output. Designed for portable and battery powered equipment such as cellular phones and portable PCs, the average supply current is only 4.3µA at 1.85V. To support potable equipment the AH18

文件：300.72 Kbytes 页数：8 Pages

DIODES

美台半导体

Low power Hall Effect Switch

[Anachip] General Description AH182/AH183 is a three-terminal Hall effect sensor device with a output driver, mainly designed for battery–operation, hand-held equipment(such as Cellular and cordless Phone, PDA) The total operation power is down to 15uW in the 2.75V supply. Features - Micropowe

文件：189.33 Kbytes 页数：6 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

LOW POWER HALL EFFECT SWITCH

General Description AH182/AH183 is a three-terminal Hall effect sensor device with an output driver, mainly designed for battery–operation, hand-held equipment (such as cellular and cordless phones, and PDA’s) The total operation power is down to 15uW in the 2.75V supply. Features • Micropower

文件：210.84 Kbytes 页数：9 Pages

DIODES

美台半导体

MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR

General Description AH1822 is comprised of two Hall effect plates and an open-drain output driver, mainly designed for battery-operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total power consumption in normal operation is typically 24μW with a 3V power source. Feat

文件：230.85 Kbytes 页数：9 Pages

DIODES

美台半导体

MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR

General Description AH1822 is comprised of two Hall effect plates and an open-drain output driver, mainly designed for battery-operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total power consumption in normal operation is typically 24μW with a 3V power source. Feat

文件：230.85 Kbytes 页数：9 Pages

DIODES

美台半导体

MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR

General Description AH1822 is comprised of two Hall effect plates and an open-drain output driver, mainly designed for battery-operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total power consumption in normal operation is typically 24μW with a 3V power source. Feat

文件：230.85 Kbytes 页数：9 Pages

DIODES

美台半导体

LOW POWER HALL EFFECT SWITCH

General Description AH182/AH183 is a three-terminal Hall effect sensor device with an output driver, mainly designed for battery–operation, hand-held equipment (such as cellular and cordless phones, and PDA’s) The total operation power is down to 15uW in the 2.75V supply. Features • Micropower

文件：210.84 Kbytes 页数：9 Pages

DIODES

美台半导体