8V19N880中文资料RF Sampling Clock Generator and Jitter Attenuator数据手册Renesas规格书

描述 Description

The 8V19N880 is a fully integrated FemtoClock® RF Sampling Clock Generator and Jitter Attenuator designed as a high-performance clock solution for conditioning and frequency/phase management of wireless base station radio equipment boards. The device is optimized to deliver excellent phase noise performance as required in 4G, 5G and including mmWave radio implementations. The device supports JESD204B (subclass 0 and 1) and JESD204C.

A two-stage PLL architecture supports both jitter attenuation and frequency multiplication. The first stage PLL is the jitter attenuator and uses an external VCXO for best possible phase noise characteristics. The second stage PLL locks on the first PLL output signal and synthesizes the target frequency. The second stage PLL can use the internal or an external high-frequency VCO.

The device generates the high-frequency clocks and the low-frequency synchronization signals (SYSREF) from the selected VCO. SYSREF signals are internally synchronized to the clock signals. The integrated signal delay blocks can be used to achieve phase alignment, controlled phase offsets between system reference and clock signals and to align/delay individual output signals. The four redundant inputs are monitored for activity. Four selectable clock switching modes are provided to handle clock input failure scenarios. Auto-lock, individually programmable output frequency dividers, and phase adjustment capabilities are added for flexibility.

The device is configured through a 3/4-wire SPI interface and reports lock and signal loss status in internal registers and via the GPIO[1:0] outputs. Internal status bit changes can also be reported via a GPIO output.

For information regarding evaluation boards and material, please contact your local sales representative.

特性 Features

• High-performance clock RF sampling clock generator and clock jitter attenuator with support for JESD204B/C
• Integrated phase noise of 74fs RMS (12kHz–20MHz, 491.52MHz)
• Eight output channels with a total of 18 outputs
• Clock output frequencies: up to 3932.16MHz (internal VCO) and 6GHz (optional external VCO)
• Deterministic phase delay and integrated phase delay circuits
• SPI 3/4 wire configuration interface
• Package: 100-CABGA (11 × 11 mm²)
• Temperature range: -40°C to +95°C (board)