887 Series High Temp Card Edge Connector | Black | 0.156 (3.96mm) Pitch | 0.200 (5.08mm) Row Spacing | High Profile Insulator

Features 0.156 (3.96mm) Contact Spacing by 0.200 (5.08mm) Row Spacing Accepts .062 (1.57mm) Nominal Thickness P.C. Board High Profile Insulator Body, .600 (15.24mm) Card Slot Depth of .330 (8.38mm) Contact Termination Options include P.C. Tail, Wire Hole, Wire Wrap, 90 and Extender Board Bend

文件：294.02 Kbytes 页数：4 Pages

EDAC

亚得电子

CABLE CLAMPS AND TIES

文件：104.09 Kbytes 页数：2 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

MSD DIS Coil Interface Module

文件：297.28 Kbytes 页数：4 Pages

MALLORY

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器

丝印：8871；Package：SOPowerPAD(DDA)；DRV8871 3.6-A Brushed DC Motor Driver With Internal Current Sense (PWM Control)

1 Features 1• H-Bridge Motor Driver – Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads • Wide 6.5-V to 45-V Operating Voltage • 565-mΩ Typical RDS(on) (HS + LS) • 3.6-A Peak Current Drive • PWM Control Interface • Current Regulation Without a Sense Resistor • Low-Power

文件：1.54463 Mbytes 页数：27 Pages

TI

德州仪器