DRV8871DDAR集成电路（IC）的电机驱动器控制器规格书PDF中文资料

DRV8871DDAR属于集成电路（IC）的电机驱动器控制器。由德州仪器制造生产的DRV8871DDAR电机驱动器，控制器产品属于电机驱动器和控制器电源管理集成电路 (PMIC) 系列，可用于控制或操作从某电源施加到电机或相关机电执行器的电源。所实现的具体功能和特性集根据预期负载和预期应用的特性有很大差异，范围从用于有刷电机的简单开环速度控制到基于步进电机的高级闭环运动控制。

1 Features

1• H-Bridge Motor Driver

– Drives One DC Motor, One Winding of a

Stepper Motor, or Other Loads

• Wide 6.5-V to 45-V Operating Voltage

• 565-mΩ Typical RDS(on) (HS + LS)

• 3.6-A Peak Current Drive

• PWM Control Interface

• Current Regulation Without a Sense Resistor

• Low-Power Sleep Mode

• Small Package and Footprint

– 8-Pin HSOP With PowerPAD™

– 4.9 × 6 mm

• Integrated Protection Features

– VM Undervoltage Lockout (UVLO)

– Overcurrent Protection (OCP)

– Thermal Shutdown (TSD)

– Automatic Fault Recovery

2 Applications

• Printers

• Appliances

• Industrial Equipment

• Other Mechatronic Applications

3 Description

The DRV8871 device is a brushed-DC motor driver

for printers, appliances, industrial equipment, and

other small machines. Two logic inputs control the Hbridge

driver, which consists of four N-channel

MOSFETs that can control motors bidirectionally with

up to 3.6-A peak current. The inputs can be pulsewidth

modulated (PWM) to control motor speed, using

a choice of current-decay modes. Setting both inputs

low enters a low-power sleep mode.

The DRV8871 device has advanced currentregulation

circuitry that does not use an analog

voltage reference or external sense resistor. This

novel solution uses a standard low-cost, low-power

resistor to set the current threshold. The ability to limit

current to a known level can significantly reduce the

system power requirements and bulk capacitance

needed to maintain stable voltage, especially for

motor startup and stall conditions.

The device is fully protected from faults and short

circuits, including undervoltage (UVLO), overcurrent

(OCP), and overtemperature (TSD). When the fault

condition is removed, the device automatically

resumes normal operation.