10 Ohm single-pole double-throw analog switch

1. General description The 74LVC1G3157 is a single-pole double-throw analog switch with a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Control inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devic

文件：333.64 Kbytes 页数：22 Pages

NEXPERIA

安世

SINGLE-POLE DOUBLE-THROW ANALOG SWITCH

文件：1.13612 Mbytes 页数：18 Pages

DIODES

美台半导体

2-channel analog multiplexer/demultiplexer

文件：121.65 Kbytes 页数：22 Pages

恩XP

2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER

文件：133.49 Kbytes 页数：22 Pages

PHI

PHI

2-channel analog multiplexer/demultiplexer

文件：176.92 Kbytes 页数：25 Pages

PHI

PHI

Single 1 to 2 Channel Multiplexer

The 74LVC1G3157 is a single-pole double-throw analog switch. The device is designed for operation with a power supply range of 1.65V to 5.5V. The bidirectional switch can handle signal amplitudes between Vcc and Ground. The OFF state impedance of the switch is typically 50 megaohms while the ON stat •Wide Supply Voltage Range from 1.65 to 5.5V\n•Control Pin Includes Hysteresis Allowing for Slower Input Rise and Fall times\n•CMOS low power consumption\n•Very Low ON-State Resistance•7.5 ohm (typical) at VCC = 2.7V\n•6.5 ohm (typical) at VCC = 3.3V\n•6 ohm (typical) at VCC = 4.5V\n\n•Break Before ;

Diodes

美台半导体

丝印：CC55；Package：SOT-23(DBV)；SN74LVC1G3157 Single-Pole Double-Throw Analog Switch

1 Features • ESD protection exceeds JESD 22 – 2000V Human Body Model (A114-A) – 1000V Charged-Device Model (C101) • 1.65V to 5.5V VCC operation • Qualified for 125°C operation • Specified break-before-make switching • Rail-to-rail signal handling • Operating frequency typically 340MHz at r

文件：3.28812 Mbytes 页数：54 Pages

TI

德州仪器

丝印：CC55；Package：SOT-23(DBV)；SN74LVC1G3157 Single-Pole Double-Throw Analog Switch

1 Features • ESD protection exceeds JESD 22 – 2000V Human Body Model (A114-A) – 1000V Charged-Device Model (C101) • 1.65V to 5.5V VCC operation • Qualified for 125°C operation • Specified break-before-make switching • Rail-to-rail signal handling • Operating frequency typically 340MHz at r

文件：3.28812 Mbytes 页数：54 Pages

TI

德州仪器

丝印：CC55；Package：SOT-23(DBV)；SN74LVC1G3157 Single-Pole Double-Throw Analog Switch

1 Features • ESD protection exceeds JESD 22 – 2000V Human Body Model (A114-A) – 1000V Charged-Device Model (C101) • 1.65V to 5.5V VCC operation • Qualified for 125°C operation • Specified break-before-make switching • Rail-to-rail signal handling • Operating frequency typically 340MHz at r

文件：3.28812 Mbytes 页数：54 Pages

TI

德州仪器

丝印：C57；Package：SOT-5X3(DRL)；SN74LVC1G3157 Single-Pole Double-Throw Analog Switch

1 Features • ESD protection exceeds JESD 22 – 2000V Human Body Model (A114-A) – 1000V Charged-Device Model (C101) • 1.65V to 5.5V VCC operation • Qualified for 125°C operation • Specified break-before-make switching • Rail-to-rail signal handling • Operating frequency typically 340MHz at r

文件：3.28812 Mbytes 页数：54 Pages

TI

德州仪器