Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

文件：289.06 Kbytes 页数：17 Pages

NEXPERIA

安世

Octal D-type flip-flop; positive edge-trigger; 3-state

The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock ( • Wide supply voltage range from 2.0 V to 6.0 V\n• CMOS low power dissipation\n• High noise immunity\n• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B\n• Complies with JEDEC standards:• JESD8C (2.7 V to 3.6 V)\n• JESD7A (2.0 V to 6.0 V)\n\n• Input levels:• For 74HC574: CMOS level\n;

Nexperia

安世

Octal D-type flip-flop; positive edge-trigger; 3-state

The 74HC574-Q100; 74HCT574-Q100 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to- • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• Wide supply voltage range from 2.0 V to 6.0 V\n• CMOS low power dissipation\n• High noise immunity\n• Latch-up performance exceeds 100 mA per JESD 78 Class II Lev;

Nexperia

安世

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere

文件：57.7 Kbytes 页数：7 Pages

PHI

PHI

CMOS Digital Integrated Circuits Silicon Monolithic

Functional Description • Octal D-Type Flip Flop with 3-State Outputs General The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low pow

文件：220.7 Kbytes 页数：12 Pages

TOSHIBA

东芝

Octal D-type flip-flop; positive edge-trigger; 3-state

1. General description The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirement

文件：289.06 Kbytes 页数：17 Pages

NEXPERIA

安世