BCD to 7-Segment Decoder/Driver with Open-Collector Outputs

General Description The DM74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the data with seven AND/OR gates having open-collector outputs to drive indicator segments directly. Each segment output is guaranteed to sink 24 mA in the ON (LOW)

文件：67.36 Kbytes 页数：6 Pages

Fairchild

仙童半导体

BCD to 7-Segment Decoders/Drivers

General Description The DM7446A and DM7447A feature active-LOW outputs designed for driving common-anode LEDs or incandescent indicators directly. All of the circuits have full ripple-blanking input/output controls and a lamp test input. Segment identification and resultant displays are shown on

文件：52.1 Kbytes 页数：6 Pages

Fairchild

仙童半导体

BCD to 7-Segment Decoder/Driver

The SN74LS47 are Low Power Schottky BCD to 7-Segment Decoder /Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving indicators directly. Seven NAND gates and one driver are connected in pairs to make BCD dat

文件：132.31 Kbytes 页数：8 Pages

ONSEMI

安森美半导体

Scotch-Brite??General Purpose Hand pad ??A/O Very Fine, 7447

文件：704.4 Kbytes 页数：2 Pages

3M

BCD TO 7-SEGMENT DECODER-DRIVER(Low=on, 40-mA, 30-Volt Outputs)

文件：46.45 Kbytes 页数：1 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

BCD to 7-Segment Decoders/Drivers

文件：118.73 Kbytes 页数：6 Pages

NSC

国半

BCD to 7-Segment Decoder / Driver

The SN74LS47 are Low Power Schottky BCD to 7-Segment Decoder /Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current\noutputs for driving indicators directly. Seven NAND gates and one driver are connected in pairs to make BCD data and

ONSEMI

安森美半导体

包装：散装 类别：工具 磨料和表面修整产品 描述：G PURP HAND PAD 7447 6X9\

3M

WE-FI Leaded Toroidal Line Choke

General Properties: Ambient Temperature (referring to IR) -40 up to +65 °C Operating Temperature -40 up to +105 °C Storage Conditions (in original packaging)

文件：363.8 Kbytes 页数：5 Pages

WURTHWurth Elektronik GmbH & Co. KG, Germany.

伍尔特伍尔特集团

丝印：101；WE-TIF Radial Leaded Wire Wound Inductor with 4 Pins

E General information: It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. •Ambient temperature: -40°C to +85°C (refering to IR) •Operating temperature: -40°C to +125°C •Storage temperature (on tape & reel): -20°C to +40°C; 75 RH max

文件：1.23315 Mbytes 页数：6 Pages

WURTHWurth Elektronik GmbH & Co. KG, Germany.

伍尔特伍尔特集团