Ultra-miniature Surface Mount Half-pitch DIP Switches

Features/Benefits • Bifurcated contact for increased electrical reliability • Tin-lead plated terminals for reliable solder coverage • Process sealed for surface mount soldering and washable processing • RoHS compliant - options available Typical Applications • Hand-held electronic devices

文件：126.3 Kbytes 页数：1 Pages

ITT

Interference and noise suppression circuit for FM receivers

GENERAL DESCRIPTION The TDA1001B is a monolithic integrated circuit for suppressing interference and noise in FM mono and stereo receivers. Features • Active low-pass and high-pass filters • Interference pulse detector with adjustable and controllable response sensitivity • Noise

文件：108.43 Kbytes 页数：13 Pages

PHI

PHI

Interference and noise suppression circuit for FM receivers

GENERAL DESCRIPTION The TDA1001B is a monolithic integrated circuit for suppressing interference and noise in FM mono and stereo receivers. Features • Active low-pass and high-pass filters • Interference pulse detector with adjustable and controllable response sensitivity • Noise

文件：108.43 Kbytes 页数：13 Pages

PHI

PHI

Interference and noise suppression circuit for FM receivers

GENERAL DESCRIPTION The TDA1001B is a monolithic integrated circuit for suppressing interference and noise in FM mono and stereo receivers. Features • Active low-pass and high-pass filters • Interference pulse detector with adjustable and controllable response sensitivity • Noise

文件：108.43 Kbytes 页数：13 Pages

PHI

PHI

DVB-C channel receiver

GENERAL DESCRIPTION The TDA10021HT is a single-chip DVB-C channel receiver for 4, 16, 32, 64, 128 and 256 QAM modulated signals. The device interfaces directly to the IF signal, which is sampled by a 10-bit ADC. FEATURES • 4, 16, 32, 64, 128 and 256 Quadrature Amplitude Modulation (QAM) demodul

文件：92.74 Kbytes 页数：16 Pages

PHI

PHI

DVB-C channel receiver

GENERAL DESCRIPTION The TDA10021HT is a single-chip DVB-C channel receiver for 4, 16, 32, 64, 128 and 256 QAM modulated signals. The device interfaces directly to the IF signal, which is sampled by a 10-bit ADC. FEATURES • 4, 16, 32, 64, 128 and 256 Quadrature Amplitude Modulation (QAM) demodul

文件：92.74 Kbytes 页数：16 Pages

PHI

PHI

MOTOR REGULATOR AND BIAS/ERASE OSCILLATOR CIRCUIT

MOTOR REGULATOR AND BIAS/ERASE OSCILLATOR CIRCUIT

文件：265.83 Kbytes 页数：7 Pages

PHI

PHI

DVB-T channel receiver

GENERAL DESCRIPTION The TDA10045H is a single-chip channel receiver for 2 and 8 kbytes COFDM modulated signals based on the ETSI specification (ETSI 300-744). The device interfaces directly to an IF signal, which could be either 1st or 2nd IF and integrates a 10-bit Analog-to-Digital Converter (A

文件：94.1 Kbytes 页数：20 Pages

PHI

PHI

DVB-T channel receiver

GENERAL DESCRIPTION The TDA10045H is a single-chip channel receiver for 2 and 8 kbytes COFDM modulated signals based on the ETSI specification (ETSI 300-744). The device interfaces directly to an IF signal, which could be either 1st or 2nd IF and integrates a 10-bit Analog-to-Digital Converter (A

文件：94.1 Kbytes 页数：20 Pages

PHI

PHI

Single-chip DVB-T channel

The TDA10046HT performs all DVB-T channel decoding functions from IF input to transport stream output, using an internal DSP core for synchronization and control.Thanks to its sharp adjacent channel digital ilter, this single-chip receiver achieves excellent performance with low cost tuners (one S

文件：737.25 Kbytes 页数：3 Pages

PHI

PHI