STA8090FG数据手册RF/IF射频/中频RFID的射频接收器规格书PDF

描述 Description

STA8090FG belongs to Teseo III family products. STA8090FG is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS).
STA8090FG, thanks to the ARM9 and wide IOs availability, can be used as microcontroller with GNSS capability, allowing a very compact design offering 256 kByte of internal RAM and 16 Mbits or 32 Mbits of internal Flash.
The minimal BOM makes STA8090FG the ideal solution for cost competitive and small footprint products such as OBD dongle, insurance boxes, trackers, telematics, portable, hands-held portable and sports accessories.
STA8090FGBD can also run TESEO-DRAW the STMicroelectronics dead reckoning firmware.

特性 Features

• STMicroelectronics® positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems
• Single die standalone receiver embedding RF Front-End and low noise amplifier
• -162 dBm indoor sensitivity (tracking mode)
• Fast TTFF 2C master interface
• 1 Synchronous Serial Port (SSP, Motorola-SPI supported)
• USB2.0 full speed (12 MHz) with integrated physical layer transceiver
• 2 Controller Area Network (CAN)
• 2 channels ADC (10 bits)
• 1 Secure-Digital Multimedia Memory Card Interfaces (SDMMC)
• 1 Multichannel Serial Port (MSP)
• Power Management Unit (PMU) embedding switching regulator
• Operating condition:
• Main voltage regulator (VINL): 1.6V to 4.3V
• Backup voltage (VINB): 1.6V to 4.3V
• Digital voltage (VDD): 1.0 V to 1.32 V
• RF core voltage (VCC): 1.2 V ± 10%
• IO Ring Voltage (VddIO): 1.8 V ± 5% or 3.3 V ± 10%
• Package:
• TFBGA99 (5 x 6 x 1.2 mm) 0.5 mm pitch
• Ambient temperature range: -40/+85°C

简介

STA8090FG属于RF/IF射频/中频RFID的射频接收器。由制造生产的STA8090FG射频接收器RF 接收器用于接收已调制的射频信号并对其进行解调，然后将数据传送到系统中进行处理。频率范围是 AM、FM、WB、0 Hz 至 64 GHz，数据速率为 250 bps 至 16 Gbps，数据接口包括连接器、I2C、I2S、引脚焊盘、并行、PCB、串行、焊盘、SPI、UART 和 USB。