STA8088FG数据手册RF/IF射频/中频RFID的射频接收器规格书PDF

描述 Description

STA8088FG is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/Glonass/QZSS).
The minimum BOM make STA8088FG the ideal solution for low-cost and small footprint products such handheld computers, cameras, data loggers, and sports accessories.
The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output with no need of external memories

特性 Features

• STMicroelectronics® 3rdgeneration positioning receiver with 32 Tracking channels and 2 fast acquisition channels compatible with GPS, Galileo and Glonass systems
• Embedded RF Front-End with separate GPS/Galieo/QZSS and Glonass IF outputs
• Embedded low noise amplifier
• -162 dBm indoor sensitivity (tracking mode)
• Fast TTFF
• 1 I2C master/slave interface
• 1 Synchronous Serial Port (SSP, Motorola-SPI supported) or 1 External SQI Flash interface
• USB2.0 dual-role full speed (12 MHz) with integrated physical layer transceiver
• 2 Controller Area Network (CAN)
• 2 channels ADC (10 bits)
• 3 Embedded 1.8 V voltage regulators
• I/O level selectable 1.8 V or 3.3 V
• Operating Condition:
• VDD12: 1.2 V ±10%
• VDD18/RF18: 1.8 V ±5%
• VLPVR1.62 V to 3.6 V
• VddIO: 1.8 V ±5%; 3.3 V ±10%
• Package:
• VFQFPN56 (7 x 7 x 0.85 mm) 0.4 mm pitch
• Ambient temperature range: -40/+85°C

简介

STA8088FG属于RF/IF射频/中频RFID的射频接收器。由制造生产的STA8088FG射频接收器RF 接收器用于接收已调制的射频信号并对其进行解调，然后将数据传送到系统中进行处理。频率范围是 AM、FM、WB、0 Hz 至 64 GHz，数据速率为 250 bps 至 16 Gbps，数据接口包括连接器、I2C、I2S、引脚焊盘、并行、PCB、串行、焊盘、SPI、UART 和 USB。