STA8090EXG数据手册RF/IF射频/中频RFID的射频接收器规格书PDF

描述 Description

STA8090EXG belongs to Teseo III family products.
STA8090EXG is a highly integrated System-On-Chip GNSS receiver designed for high-flexible and cost effective solution addressing, trackers, hand-held, in-dash navigation and Telematics applications.
STA8090EXG embeds the new ST GNSS positioning engine capable of receiving signals from multiple satellite navigation systems, including GPS, Galileo, GLONASS, BeiDou QZSS.
The STA8090EXG combines a high performance ARM946 microprocessor with I/O capabilities and enhanced peripherals. It embeds innovative power management unit for power consumption optimization.
STA8090EXGBD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.

特性 Features

• STMicroelectronics® positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems
• Single die standalone receiver embedding RF Front-End and low noise amplifier
• -162 dBm indoor sensitivity (tracking mode)
• Fast TTFF
• 1 I2C master interface
• 1 Synchronous Serial Port (SSP, Motorola-SPI supported)
• USB2.0 full speed (12 MHz) with integrated physical layer transceiver
• 2 Controller Area Network (CAN) (STA8090EXGB only)
• 8 channels ADC (10 bits)
• 1 Secure-Digital Multimedia Memory Card Interfaces (SDMMC)
• 1 Multichannel Serial Port (MSP)
• Power Management Unit (PMU) embedding switching regulator
• Operating condition:
• Main voltage regulator (VINL): 1.6 V to 4.3 V
• Backup voltage (VINB): 1.6 V to 4.3 V
• Digital voltage (VDD): 1.0 V to 1.32 V
• RF core voltage (VCC): 1.2 V ± 10%
• IO Ring Voltage (VddIO): 1.8 V ± 5% or 3.3 V ± 10%
• Package:
• TFBGA169 9 x 9 x 1.2 mm 0.65 pitch
• Ambient temperature range: -40/ +85 °C

简介

STA8090EXG属于RF/IF射频/中频RFID的射频接收器。由制造生产的STA8090EXG射频接收器RF 接收器用于接收已调制的射频信号并对其进行解调，然后将数据传送到系统中进行处理。频率范围是 AM、FM、WB、0 Hz 至 64 GHz，数据速率为 250 bps 至 16 Gbps，数据接口包括连接器、I2C、I2S、引脚焊盘、并行、PCB、串行、焊盘、SPI、UART 和 USB。