STA8089FGA数据手册RF/IF射频/中频RFID的射频接收器规格书PDF

描述 Description

STA8089FGA belongs to Teseo III family products. The device is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS).
STA8089FGA is compliant with ST Automotive Grade qualification which includes in addition to AEC-Q100 requirements a set of production flow methodologies targeting zero defect per million.
The device is backward compatible with STA8088FG, this enables fast customer application migration.
The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output with no need of external memories.
STA8089FGAD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.

特性 Features

• AEC-Q100 qualified
• STMicroelectronics® positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems
• ST-DRAW (Dead Reckoning Automotive Way) supported (STA8089FGAD only)
• Pin to pin compatible with STA8088FG
• Single die standalone receiver embedding RF Front-End and low noise amplifier
• -162 dBm indoor sensitivity (tracking mode)
• Fast TTFF
• 32-bit Watch-dog timer
• 3 UARTs
• 1 I2C master interface
• 1 Synchronous Serial Port (SSP, Motorola-SPI supported)
• USB2.0 full speed (12 MHz) with integrated physical layer transceiver
• 2 Controller Area Network (CAN)
• 2 channels ADC (10 bits)
• Operating condition:
• Main voltage regulator (VINL): 1.8 V ± 5%
• Backup voltage (VINB): 1.6 V to 4.3 V
• Digital voltage (VDD): 1.1 V to 1.32 V
• RF core voltage (VCC): 1.2 V ± 10%
• IO Ring Voltage (VddIO): 1.8 V ± 5% or 3.3 V ± 10%
• Package:
• VFQFPN56 (7 x 7 x 1.0 mm) 0.4 mm pitch
• Ambient temperature range: -40/+85°C

简介

STA8089FGA属于RF/IF射频/中频RFID的射频接收器。由制造生产的STA8089FGA射频接收器RF 接收器用于接收已调制的射频信号并对其进行解调，然后将数据传送到系统中进行处理。频率范围是 AM、FM、WB、0 Hz 至 64 GHz，数据速率为 250 bps 至 16 Gbps，数据接口包括连接器、I2C、I2S、引脚焊盘、并行、PCB、串行、焊盘、SPI、UART 和 USB。