4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

文件：253.91 Kbytes 页数：1 Pages

ADVANTECH

研华科技

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

文件：253.91 Kbytes 页数：1 Pages

ADVANTECH

研华科技

2U system with 8th/9th Gen Intel® Core™ i CPU (LGA 1151)

Features ƒ Supports Intel® 8th/ 9th Gen Core™ i processor (LGA1151) with Intel C246/ H310 chipset ƒ Up to 4 x Extension Card by Riser Card ƒ 3 x GigaLAN and 8 x USB3.0 ƒ 2 x RS-232/422/485 and 4 x RS232 serial ports, 16 bit GPIO ƒ 4 x SATA, 1 x M.2 E key, 1 x M.2 B/M key, 2 x F/S mSATA ƒ VG

文件：648.64 Kbytes 页数：2 Pages

ADVANTECH

研华科技

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

文件：293.28 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

文件：293.28 Kbytes 页数：1 Pages

ADVANTECH

研华科技

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

文件：282.18 Kbytes 页数：1 Pages

ADVANTECH

研华科技

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

文件：282.18 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Basic Motion Control Card with Multi Latch/Compare Trigger Function

Features ƒƒ Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Support velocity motion ƒƒ Supports speed override ƒƒ Supports T/S-curve and programmable acceleration/d

文件：285.99 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Basic Motion Control Card with Multi Latch/Compare Trigger Function

Features ƒƒ Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Support velocity motion ƒƒ Supports speed override ƒƒ Supports T/S-curve and programmable acceleration/d

文件：285.99 Kbytes 页数：1 Pages

ADVANTECH

研华科技

Basic Motion Control Card with Multi Latch/Compare Trigger Function

Features ƒƒ Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Support velocity motion ƒƒ Supports speed override ƒƒ Supports T/S-curve and programmable acceleration/d

文件：285.99 Kbytes 页数：1 Pages

ADVANTECH

研华科技