Integrated Circuit 5−Stage Darlington Transistor Array

Description: The NTE2084 is a 5−channel sink driver consisting of 10 NPN transistors connected to form five high current gain driver pairs. Features: • Output sustaining voltage to 25V • High output sink current to 500mA • PMOS compatible input • Wide operating temperature rang

文件：75.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit 4-Stage Darlington Array

Description: The NTE2085 and NTE2086 are high voltage, high current Darlington arrays in a 16–Lead DIP type package are designed for use as an interface between low–level logic and a variety of peripheral loads such as relays, solenoids, DC and stepper motors, multiplexed LED and incandescent d

文件：22.02 Kbytes 页数：3 Pages

NTE

Integrated Circuit 4-Stage Darlington Array

Description: The NTE2085 and NTE2086 are high voltage, high current Darlington arrays in a 16–Lead DIP type package are designed for use as an interface between low–level logic and a variety of peripheral loads such as relays, solenoids, DC and stepper motors, multiplexed LED and incandescent d

文件：22.02 Kbytes 页数：3 Pages

NTE

Integrated Circuit 4-Stage Darlington Array w/Pre-Drive Stage for TTL

Description: The NTE2087 is a High–Voltage, High–Current Darlington Array designed to interface low–level logic to a variety of peripheral loads such as relays, solenoids, d–c and stepper motors, multiplexed LED and incandescent displays, heaters, and similar loads to 480 watts (1.5 A per outpu

文件：20.88 Kbytes 页数：2 Pages

NTE

Integrated Circuit 4-Segment Darlington Array, w/Pre-Driver Stage for use with PMOS and 12V CMOS

Description: The NTE2088 is a High voltage, high current Darlington array in a 16–Lead DIP type package designed as an interface between low–level logic and a variety of peripheral loads such as relays, solenoids, DC and stepper motors, multiplexed LED and incandescent displays, heaters, and si

文件：22.56 Kbytes 页数：3 Pages

NTE

Integrated Circuit 7-Channel Transistor Array

Description: The NTE2090 is an integrated circuit in a 16–Lead DIP type package comprised of six NPN low saturation drivers. All units feature integral clamp diodes for switching inductive loads and protective diodes for protection against a negative input voltage. Features: • Low Saturation

文件：21.79 Kbytes 页数：2 Pages

NTE

MICROPROCESSOR & MEMORY CIRCUITS

文件：165.96 Kbytes 页数：1 Pages

NTE

HARDWARE ACCESSORIES

文件：190.26 Kbytes 页数：9 Pages

etc2List of Unclassifed Manufacturers

etc未分类制造商etc2未分类制造商

Integrated Circuit Dolby B–Type Noise Reduction Processor

Description:\nThe NTE2003 is a monolithic integrated circuit in a 16–Lead DIP type package specifically designed to realized the Dolby B–type noise reduction system.Features:\n• Reduced distortion at high frequencies and high signal levels\n• Improved transient stability\n• Wide Operating Voltage Ra

NTE

Integrated Circuit 7–Channel Darlington Array/Driver

Description:\nThe NTE2011 through NTE2015 are high–voltage, high–current Darlington arrays in a 16–Lead DIP type package and are comprised of seven silicon NPN Darlington pairs on a common monolithic sub strate. All units have open–collector outputs and integral diodes for inductive load transient s

NTE