Integrated Circuit Hex LED Digit Driver

Description: The NTE2027 is an interface circuit in a 14–Lead DIP typ package designed to be used in conjunction with MOS integrated circuits and common cathode LED’s in serially addressed multi–digit displays. The number of drivers required for this time–multiplexed system is minimized as a re

文件：20.14 Kbytes 页数：2 Pages

NTE

Integrated Circuit 7-Segment High Voltage Decoder/Driver

Description: The NTE2028 is an integrated circuit in a 16–Lead DIP type package custom designed to decode four lines of BCD and drive a gas–filled seven–segment display tube. Each output constitutes a switchable, adjustable current sink which provides constant current to the tube segment, ev

文件：31.53 Kbytes 页数：4 Pages

NTE

Integrated Circuit High Voltage Segment Driver for Gas Discharge Tubes

Description: The NTE2030 is capable of driving 8 segments of a high voltage display tube with a constant output sink current, which can be adjusted by external program resistor, Rp. The program current is half that of output “ON” current. In the “OFF” state the outputs can tolerate more than 80

文件：25.66 Kbytes 页数：3 Pages

NTE

Integrated Circuit Seven-Segment Gas-Discharge Display Driver

Description: The NTE2031 is a seven channel digit (anode) driver in a 16–Lead DIP type package specifically designed to be used with high–voltage, gas–discharge numeric displays. This device requires a low logic level to turn the drivers on with a low input current requirement of any 300µA typi

文件：19.61 Kbytes 页数：2 Pages

NTE

Integrated Circuit BCD-to-Seven-Segment Decoder Driver

Description: The NTE2032 is a monolithic integrated circuit in a 16–Lead DIP type package that performs the BCD–to–seven–segment decoding function and features constant–current segment drivers. When used with the NTE2054 A/D converter, the NTE2032 provides a complete digital readout system with

文件：23.03 Kbytes 页数：3 Pages

NTE

Integrated Circuit Non-Inverting Transistor Array, Low Input Active

Description: The NTE2033 is a non–inverting transistor array, which is comprised of four NPN darlington output stages and PNP input stages. This device is low level input active driver and is suitable for operation with TTL, 5V C–MOS and 5V Microprocessor which have sink current output drivers.

文件：22.03 Kbytes 页数：2 Pages

NTE

MISCELLAMEOUS INTEGRATED CIRCUITS

[NTE-Electronic]

文件：32.11 Kbytes 页数：1 Pages

ETC1List of Unclassifed Manufacturers

etc未分类制造商未分类制造商

Integrated Circuit 31/2-Digit Single Chip A/D Converter

Description: The NTE2050 and NTE2051 are high performance, low power 3–1/2 digit A/D converters containing all the necessary active devices on a single CMOS IC. Included are seven segment decoders, display drivers, reference and a clock. The NTE2051 is designed to interface with a liquid crystal

文件：26.71 Kbytes 页数：4 Pages

NTE

Integrated Circuit 31/2-Digit Single Chip A/D Converter

Description: The NTE2050 and NTE2051 are high performance, low power 3–1/2 digit A/D converters containing all the necessary active devices on a single CMOS IC. Included are seven segment decoders, display drivers, reference and a clock. The NTE2051 is designed to interface with a liquid crystal

文件：26.71 Kbytes 页数：4 Pages

NTE

Integrated Circuit 8-Bit MPU Compatible A/D Converter

Description: The NTE2053 is a CMOS 8–bit successive approximation Analog to Digital converter in a 20–Lead DIP type package which uses a differential potentiometric ladder – similar to the 256R products. This device is designed to allow operation with the NSC800 and INS8080A derivative control

文件：41.04 Kbytes 页数：5 Pages

NTE