Bi-Directional Zero-Drift

文件：71.74 Kbytes 页数：5 Pages

ONSEMI

安森美半导体

NCS199A1: Current Sense Amplifier, 1.5% Max. Gain Error, Bi-Directional Zero-Drift, -0.3V to 26V CMIVR

The NCS199A1, NCS199A2 and NCS199A3 are voltage output\ncurrent shunt monitors that can measure voltage across shunts at\ncommon−mode voltages from −0.3 V to 26 V, independent of supply\nvoltage. Three fixed gains are available: 50 V/V, 100 V/V or 200 V/V.\nThe low offset of the zero−drift architect Wide common mode input range -0.3 V to 26 V\nHigh-Side Current Sensing for High Voltage Systems\nSupply voltage range from 2.7 V to 26 V\nFlexible System Supply Voltage\nLow offset voltage ±150µV Max\nLow Value Current Sense Resistors for Better Power Efficiency\nLow offset drift\nTemperature Sensit;

ONSEMI

安森美半导体

Low- or High-Side Current Sensing

文件：523.62 Kbytes 页数：15 Pages

ONSEMI

安森美半导体

丝印：AZ3；Package：SC70-6；Low- or High-Side Current Sensing

文件：523.62 Kbytes 页数：15 Pages

ONSEMI

安森美半导体

Current-Shunt Monitor, Voltage Output Bi-Directional Zero-Drift

文件：72.45 Kbytes 页数：5 Pages

ONSEMI

安森美半导体

Bi-Directional Zero-Drift

文件：71.74 Kbytes 页数：5 Pages

ONSEMI

安森美半导体

电流分路监控器，26V， 电压输出，双向，零漂移，低压侧或高压侧电流感应

The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing across the shunt with m • Wide common mode input range -0.3 V to 26 V\n• High-Side Current Sensing for High Voltage Systems\n• Low offset voltage ± 150 µV Max\n• Low Ohm value Current Sense Resistors\n• Low Offset Drift: 0.5 µV/°C\n• High accuracy over temperature leading to better power efficiency\n• Supply voltage range ;

ONSEMI

安森美半导体