TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV125 is a single buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for wide low voltage operating range (0.9V t

文件：290.38 Kbytes 页数：9 Pages

Fairchild

仙童半导体

TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

文件：301.55 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with 3-STATE Output

文件：312.24 Kbytes 页数：9 Pages

Fairchild

仙童半导体

TinyLogic LP-A Buffer with 3-STATE Output

文件：406.64 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A 缓冲器，带 3 态输出

NC7SV125是带3态输出的单通道缓冲器，属于飞兆TinyLogic®中的超低功耗(ULP-A)系列。 ULP-A是要求极高速度、高驱动和低功耗的应用的理想选择。 此产品设计用于宽低电压工作范围（0.9V到3.6V VCC），适合驱动和速度要求高于TinyLogic ULP系列的应用，但仍具有同级最佳的低功耗运行特点。 NC7SV125专为优化功耗和速度而设计，采用先进的CMOS技术制造，在实现高速运行的同时又能保持较低的CMOS功耗。 •0.9V至3.6V VCC电源操作范围\n•VCC为0.9 V至3.6 V时，耐过压I/O为3.6 V\n•极高速度tPD1.0 ns（典型值），2.7V到3.6V VCC2.0ns（典型值），2.3V到2.7V VCC3.0 ns（典型值），1.65V到1.95V VCC3.5 ns （典型值），1.4V到1.6V VCC6.0 ns（典型值），1.1V到1.3V VCC13 ns（典型值），0.9V VCC\n•断电高阻抗输入和输出\n•高静态驱动(IOH/IOL)±24 mA @ 3.00V VCC±18 mA @ 2.30V VCC±6 mA @ 1.65V VCC±4 mA @ 1;

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

文件：301.55 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

丝印：H6；Package：MicroPak；TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

文件：301.55 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV125 is a single buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for wide low voltage operating range (0.9V t

文件：290.38 Kbytes 页数：9 Pages

Fairchild

仙童半导体

TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV125 is a single buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for wide low voltage operating range (0.9V t

文件：290.38 Kbytes 页数：9 Pages

Fairchild

仙童半导体

丝印：V25；Package：SC-88A；TinyLogic ULP-A Buffer with Three-State Output

The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports

文件：301.55 Kbytes 页数：10 Pages

ONSEMI

安森美半导体