磁性电流/线性霍尔芯片 - 可编程电流检测芯片

麦歌恩MT9711系列产品，是一款单片集成式的可编程霍尔效应线性传感器芯片。可以被广泛应用于精确电流检测或者位置检测中。每颗MT9711都由一个高灵敏度的霍尔元件，一个低噪声小信号高增益放大器，钳位电路，过流保护输出级以及高带宽动态补偿电路组成。MT9711输出一个与施加磁通密度成比例的模拟电压信号。客户可以通过在输出引脚上编程来灵活配置灵敏度以及校准静态（零磁场）输出电压，以优化最终应用的性能，灵敏度可在0.5~6.5mV/Gs的范围内通过编程调节。芯片内部集成高精度的带息基准电源，其静态输出电压与灵敏度随电源的变化而变化。

MagnTek

麦歌恩(纳芯微)

FME Jack to BNC Male Adapter

Configuration Connector 1 FME Jack Impedance 1 50 Ohms Connector 2 BNC Male Impedance 2 50 Ohms Connector Specification 2 MIL-STD-348A Adapter Design Standard Body Style

文件：252.15 Kbytes 页数：2 Pages

PASTERNACK

HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER

DESCRIPTION The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip. FEATURES • High common mode transient immunity (CMH,

文件：93.41 Kbytes 页数：5 Pages

NEC

瑞萨

HIGH NOISE REDUCTION/ HIGH SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE 5 PIN SOP TOM OPTOCOUPLER

文件：130.74 Kbytes 页数：7 Pages

CEL