MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

ULTRA-LOW-POWER MICROCONTROLLERS

文件：6.72412 Mbytes 页数：21 Pages

TI

德州仪器

丝印：MSP430G2303；Package：VQFN(RHB)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

丝印：MSP430G2303；Package：VQFN(RHB)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

丝印：MSP430G2303；Package：VQFN(RHB)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

丝印：MSP430G2303；Package：VQFN(RHB)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

丝印：MSP430G2303；Package：VQFN(RHB)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

丝印：MSP430G2303；Package：VQFN(RHB)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器

具有 4KB 闪存、256B SRAM、UART/SPI/I2C 和计时器的 16MHz MCU

德州仪器 (TI) MSP430 系列超低功耗微控制器包含多种器件，它们具有面向各种应用的不同外设集。 这种架构与 5 种低功耗模式相组合，专为在便携式测量应用中延长电池的使用寿命而进行了优化。 该器件具有一个强大的 16 位 RISC CPU、16 位寄存器和有助于获得最大编码效率的常数发生器。 数字控制振荡器 (DCO) 可在不到 1 µs 的时间里完成从低功耗模式至运行模式的唤醒。 MSP430G2x03 和 MSP430G2x33 系列是超低功耗混合信号微控制器，具有内置的 16 位计时器、最多 24 个支持触摸感测的 I/O 引脚、以及采用通用串行通信接口的内置通信能力。 此外，MS • 低电源电压范围： 1.8V 至 3.6V\n• 运行模式： 230 μA （在1 MHz 频率下），2.2 V\n• 关断模式 （RAM 保持）： 0.1μA\n• 5 种节能模式\n• 16 位 RISC 架构、62.5ns 指令周期\n• 高达16 MHz 的内部频率，具有4 种校准频率\n• 32-kHz 晶体\n• 具有 3 个捕获/比较寄存器的两个 16 位 Timer_A\n• 通用串行通信接口(USCI) \n• IrDA 编码器和解码器\n• I2C™ \n• 带内部基准、采样与保持以及自动扫描功能的 10 位 200-ksps 模数 (A/D) 转换器（见 ）\n• 串行;

TI

德州仪器

丝印：430G2303；Package：TSSOP(PW)；MSP430G2x33, MSP430G2x03 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply-Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 230 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：2.1627 Mbytes 页数：96 Pages

TI

德州仪器