MSP430F423

MIXED SIGNAL MICROCONTROLLER

MSP430F423

Mixed-Signal Microcontrollers

MSP430F423

MIXED SIGNAL MICROCONTROLLER;

MSP430F423A

具有 3 个 16 位 Σ-Δ ADC、128 段 LCD、8KB 闪存和 256B RAM 的 8MHz 感应 MCU; • Ultra-Low Power Consumption: \n• Active Mode: 400 µA at 1 MHz, 3.0 V\n• Standby Mode: 1.6 µA\n• Off Mode (RAM Retention): 0.1 µA\n \n• Five Power-Saving Modes\n• Wake-Up From Standby Mode in Less Than 6 µs\n• Frequency-Locked Loop, FLL+\n• 16-Bit RISC Architecture, 125-ns Instruction Cycle Time\n• Three Independent 16-bit Sigma-Delta A/D Converters With Differential PGA Inputs\n• 16-Bit Timer_A With Three Capture/Compare Registers\n• Integrated LCD Driver for 128 Segments\n• Serial Communication Interface (USART), Asynchronous UART, or Synchronous SPI Selectable by Software\n• Brownout Detector\n• Supply Voltage Supervisor/Monitor With Programmable Level Detection\n• Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse\n• Bootstrap Loader in Flash Devices\n• Family Members Include: \n• MSP430F423A:    8KB + 256B Flash Memory, 256B RAM\n• MSP430F425A:    16KB + 256B Flash Memory, 512B RAM\n• MSP430F427A:   32KB + 256B Flash Memory, 1KB RAM\n \n• Available in 64-Pin Quad Flat Pack (QFP)\n• For Complete Module Descriptions, Refer to the MSP430x4xx Family User's Guide, Literature Number SLAU056;

The Texas InstrumentsMSP430 family of ultra-low power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.The MSP430F42xA series are microcontroller configurations with three independent 16-bit sigma-delta A/D converters, each with an integrated differential programmable gain amplifier input stage. Also included are a built-in 16-bit timer, 128 LCD segment drive capability, hardware multiplier, and 14 I/O pins.Typical applications include high-resolution applications such as handheld metering equipment, weigh scales, and energy meters.

MSP430F423A

ULTRA-LOW-POWER MICROCONTROLLERS

MSP430F423AIPM

MIXED SIGNAL MICROCONTROLLER

MSP430F423AIPMR

MIXED SIGNAL MICROCONTROLLER

MSP430F423IPM

MIXED SIGNAL MICROCONTROLLER

MSP430F423IPM

MIXED SIGNAL MICROCONTROLLER

MSP430F423IPM

MIXED SIGNAL MICROCONTROLLER