MSP430AFE2x3, MSP430AFE2x2, MSP430AFE2x1 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake-up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：1.37296 Mbytes 页数：64 Pages

TI

德州仪器

MSP430AFE2x3, MSP430AFE2x2, MSP430AFE2x1 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake-up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：1.37296 Mbytes 页数：64 Pages

TI

德州仪器

MSP430AFE2x3, MSP430AFE2x2, MSP430AFE2x1 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake-up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：1.37296 Mbytes 页数：64 Pages

TI

德州仪器

MSP430AFE2x3, MSP430AFE2x2, MSP430AFE2x1 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake-up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：1.37296 Mbytes 页数：64 Pages

TI

德州仪器

MSP430AFE2x3, MSP430AFE2x2, MSP430AFE2x1 Mixed-Signal Microcontrollers

1.1 Features 1 • Low Supply Voltage Range: 1.8 V to 3.6 V • Ultra-Low Power Consumption – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA • Five Power-Saving Modes • Ultra-Fast Wake-up From Standby Mode in Less Than 1 μs • 16-Bit RISC Architec

文件：1.37296 Mbytes 页数：64 Pages

TI

德州仪器

MIXED SIGNAL MICROCONTROLLER

1FEATURES • Ultra-Low Supply Voltage (ULV) Range – 0.9 V to 1.5 V (1 MHz) – 1.5 V to 1.65 V (4 MHz) • Low Power Consumption – Active Mode (AM): 45 μA/MHz (1.3 V) – Standby Mode (LPM3, WDT_A Mode): 6 μA – Off Mode (LPM4): 3 μA • Wake-Up From LPMx in Less Than 5 μs • 16-Bit RISC Architectur

文件：824.37 Kbytes 页数：48 Pages

TI

德州仪器

MIXED SIGNAL MICROCONTROLLER

1FEATURES • Ultra-Low Supply Voltage (ULV) Range – 0.9 V to 1.5 V (1 MHz) – 1.5 V to 1.65 V (4 MHz) • Low Power Consumption – Active Mode (AM): 45 μA/MHz (1.3 V) – Standby Mode (LPM3, WDT_A Mode): 6 μA – Off Mode (LPM4): 3 μA • Wake-Up From LPMx in Less Than 5 μs • 16-Bit RISC Architectur

文件：824.37 Kbytes 页数：48 Pages

TI

德州仪器

MIXED SIGNAL MICROCONTROLLER

1FEATURES • Ultra-Low Supply Voltage (ULV) Range – 0.9 V to 1.5 V (1 MHz) – 1.5 V to 1.65 V (4 MHz) • Low Power Consumption – Active Mode (AM): 45 μA/MHz (1.3 V) – Standby Mode (LPM3, WDT_A Mode): 6 μA – Off Mode (LPM4): 3 μA • Wake-Up From LPMx in Less Than 5 μs • 16-Bit RISC Architectur

文件：824.37 Kbytes 页数：48 Pages

TI

德州仪器

MIXED SIGNAL MICROCONTROLLER

Low Supply Voltage Range 1.8 V to 3.6 V Ultralow Power Consumption − Active Mode: 160 μA at 1 MHz, 2.2 V − Standby Mode: 0.7 μA − Off Mode (RAM Retention): 0.1 μA Wake-Up From Standby Mode in Less Than 6 μs 16-Bit RISC Architecture, 125 ns Instruction Cycle Time Basic Clock Module Configu

文件：2.29392 Mbytes 页数：54 Pages

TI

德州仪器

MIXED SIGNAL MICROCONTROLLER

Low Supply Voltage Range 1.8 V to 3.6 V Ultralow Power Consumption − Active Mode: 160 μA at 1 MHz, 2.2 V − Standby Mode: 0.7 μA − Off Mode (RAM Retention): 0.1 μA Wake-Up From Standby Mode in Less Than 6 μs 16-Bit RISC Architecture, 125 ns Instruction Cycle Time Basic Clock Module Configu

文件：2.29392 Mbytes 页数：54 Pages

TI

德州仪器