6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ7220 is a boost converter with six channel current sources. It is designed for driving automotive tail lights. The MPQ7220 uses peak current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It independently regulates the current in

文件：1.79966 Mbytes 页数：24 Pages

MPS

美国芯源

6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ7220 is a boost converter with six channel current sources. It is designed for driving automotive tail lights. The MPQ7220 uses peak current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It independently regulates the current in

文件：1.79966 Mbytes 页数：24 Pages

MPS

美国芯源

6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ7220 is a boost converter with six channel current sources. It is designed for driving automotive tail lights. The MPQ7220 uses peak current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It independently regulates the current in

文件：1.79966 Mbytes 页数：24 Pages

MPS

美国芯源

6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ7220 is a boost converter with six channel current sources. It is designed for driving automotive tail lights. The MPQ7220 uses peak current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It independently regulates the current in

文件：1.79966 Mbytes 页数：24 Pages

MPS

美国芯源

6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ7220 is a boost converter with six channel current sources. It is designed for driving automotive tail lights. The MPQ7220 uses peak current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It independently regulates the current in

文件：1.79966 Mbytes 页数：24 Pages

MPS

美国芯源

6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ7220 is a boost converter with six channel current sources. It is designed for driving automotive tail lights. The MPQ7220 uses peak current mode as its PWM control architecture. The switching frequency can be programmed by a resistor. It independently regulates the current in

文件：1.79966 Mbytes 页数：24 Pages

MPS

美国芯源

6 路、每路最大电流为 100mA 的升压 LED 驱动器，符合 AEC-Q100 认证

MPQ7220 是一款集成了 6 路电流源的升压变换器，专用于驱动汽车尾灯。\n\n MPQ7220 采用峰值电流模式作为其 PWM 控制架构。可由电阻来调节开关频率。它可以独立将每个 LED 灯串的电流调节至外部电流设置电阻设定的电流值。\n\n 此器件在每个 LED 灯串端子上施加六个内部电流源以实现电流平衡，每个灯串之间的电流调节精度为 2.5%。由于 LED 调节的电压净空低且开关 MOSFET 的导通电阻小，所以此器件具有高效率特性。\n\n MPQ7220 具有丰富的保护模式以保证安全工作。保护模式有过流保护（OCP）、过压保护（OVP）、过温 • 输入电压范围：3.5V - 36V\n• 内部集成 100mΩ，50V MOSFET\n• 外部同步开关频率功能\n• 具有极好的 EMI 性能、频谱扩展功能\n• 2.5% 的电流匹配度\n• 可编程 LED 短路保护阈值\n• 高温下 LED 电流自动降低功能\n• 故障指示信号输出功能\n• 符合 AEC-Q100 1 级认证\n;

MPS

美国芯源

Package：28-SOIC（0.173"，4.40mm 宽）裸露焊盘；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） LED 驱动器 描述：IC LED DRVR RGLTR PWM 28TSSOP

Monolithic Power Systems Inc.

Package：24-VFQFN 裸露焊盘；包装：卷带（TR） 类别：集成电路（IC） LED 驱动器 描述：IC LED DRV RGLTR PWM 100MA 24QFN

Monolithic Power Systems Inc.

Package：24-VFQFN 裸露焊盘；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） LED 驱动器 描述：IC LED DRV RGLTR PWM 100MA 24QFN

Monolithic Power Systems Inc.