35V 输入、3A 峰值相电流、三相直流无刷电机驱动器

MP6631H 是一款集成功率 MOSFET 的三相直流无刷 (BLDC) 电机驱动器。该器件可采用单个或三个外部霍尔效应传感器来驱动三相 BLDC 电机，其输入电压 (VIN) 范围为 3.6V 至 35V，峰值相电流高达 3A。\n\n MP6631H通过PWM/DC 引脚上的脉宽调制 (PWM) 信号或DC 信号来控制电机速度，而且具有闭环/开环速度控制。该器件具有内置、可调速度曲线功能。它采用正弦驱动用于产生最大扭矩，以及全速范围内的优良低速纹波性能与低噪声。\n\n MP6631H提供转速检测功能。转速检测器（FG/RD 引脚）为开漏输出，它输出相对于霍尔比较器输 • 3.6V 至 35V 工作输入电压 (VIN) 范围\n• 集成 160mΩ 上管MOSFET (HS-FET) 和下管MOSFET (LSFET)\n• 支持 0V 至1.2V 直流输入或 1kHz 至 100kHz 脉宽调制 (PWM) 输入\n• 闭环/开环速度控制\n• 省电模式\n• 过流保护 (OCP)\n• FG 信号：转速指示\n• 采用 QFN-26 (3mmx4mm) 封装\n;

MPS

美国芯源

35V Input, 3A Peak Phase Current, 3-Phase BLDC Motor Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ6631H is a three-phase, brushless DC (BLDC) motor driver with integrated power MOSFETs. The device supports a single external Hall sensor or three external Hall-effect sensors to drive a three-phase BLDC motor, with up to 3A of peak phase current and an input voltage (VIN

文件：1.07586 Mbytes 页数：28 Pages

MPS

美国芯源

35V Input, 3A Peak Phase Current, 3-Phase BLDC Motor Driver, AEC-Q100 Qualified

DESCRIPTION The MPQ6631H is a three-phase, brushless DC (BLDC) motor driver with integrated power MOSFETs. The device supports a single external Hall sensor or three external Hall-effect sensors to drive a three-phase BLDC motor, with up to 3A of peak phase current and an input voltage (VIN

文件：1.07589 Mbytes 页数：28 Pages

MPS

美国芯源

16-CHARACTER 1-LINE DOT MATRIX LCD CONTROLLER DRIVER

■ GENERAL DESCRIPTON The NJU6460A/6631A is a Dot Matrix LCD controller Driver for 16-character 1-line maximum by itself. The rectangle outlook is very applicable to COG or slim TCP. The NJU6631A realizes replacement from the NJU6460A. ■ FEATURES ● 16-character/1-line Dot Matrix LCD controller

文件：458.2 Kbytes 页数：32 Pages

NJRC

日本无线