3.3V / 5V，单通道2A限流配电开关，带输出放电功能

MP62160/MP62161配电开关具有内部电流限制功能，可以防止由于错误的负载条件而损坏主机设备。该模拟开关具有85mΩ功率MOSFET，可在3.3V至5V标称输入电压范围内工作，提供2A连续负载电流，并具有2.8A典型限流值。MP62160/MP62161具有内置保护功能，可防止过流和增加的热应力。它通过进入恒流模式来限制电流，从而提供过流保护。当器件持续输出过载，超出封装功耗时，热保护功能将关断器件。一旦温度降至约120°C，器件便恢复工作。MP62160 / MP62161具有放电功能，当器件被禁用时，可为外部输出电容器提供电阻放电路径。MP62160 / MP62161采用QFN8 • 连续输出电流：2A\n• 精确限流值：2.8A\n• 输出放电功能\n• 输入电压范围：2.7V 至 5.5V\n• 静态电流：90uA\n• 85mΩ MOSFET\n• 过温关断保护\n• 欠压锁定（UVLO）保护\n• 8ms FLAG抗尖峰脉冲时间\n• 上电期间无FLAG故障\n• 反向电流阻断\n• 高电平有效和低电平有效可选\n• UL认可：E322138;

MPS

美国芯源

3.3V/5V, Single-Channel 2A Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62160/MP62161 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62160/MP62161 operates from a 3.3V or 5V input voltage and includes an 85mΩ Power MOSFET to handle up to 2A continuous load with a 2.

文件：360.92 Kbytes 页数：12 Pages

MPS

美国芯源

3.3V/5V, Single-Channel 2A Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62160/MP62161 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62160/MP62161 operates from a 3.3V or 5V input voltage and includes an 85mΩ Power MOSFET to handle up to 2A continuous load with a 2.

文件：360.92 Kbytes 页数：12 Pages

MPS

美国芯源

3.3V/5V, Single-Channel 2A Current-Limited Power Distribution Switch with Output Discharge

DESCRIPTION The MP62160/MP62161 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62160/MP62161 operates from a 3.3V or 5V input voltage and includes an 85mΩ Power MOSFET to handle up to 2A continuous load with a 2.

文件：360.92 Kbytes 页数：12 Pages

MPS

美国芯源