16V, 20A, 2.8mΩ RDS(ON), Hot-Swap Intelli-Fuse Solution

DESCRIPTION The MP5026 is a hot-swap protection device designed to protect circuitry on its output from transients on its input. It also protects its input from undesired shorts and transients from its output. The device can achieve up to 20A of continuous output current (IOUT) per device at room

文件：1.01082 Mbytes 页数：24 Pages

MPS

美国芯源

16V、20A、2.8mΩ RDS(ON)、热插拔Intelli-Fuse解决方案

MP5026 是一款热插拔保护器件，用于保护输出电路免受输入瞬变的影响，也可以保护输入免受输出的意外短路与瞬变影响。MP5026在室温下可实现每器件高达 20A 的连续输出电流 (IOUT)。\n\n 当电路卡插入带电背板电源时，MP5026通过限制负载上的浪涌电流来限制电源压降；它还利用ISET与地之间的一个低功耗电阻和软启动斜坡来控制栅极电压(VGATE)，从而实现内部 MOSFET 电流(IFET)的限制。\n\n MP5026具有多种可简化系统设计的功能，例如采用集成电流镜来监测输出电流(IOUT)，并集成片上温度采样，因此无需外部电流采样功率电阻、功率 MOSFE • 2.7V至 16V 工作输入电压 (VIN) 范围\n• 20A最大输出电流 (IOUT)\n• 2.8mΩ集成功率 MOSFET\n• ±1% IMON报告精度\n• 内置 MOSFET 驱动器\n• 3.3V 低压差（LDO）输出\n• 内置插入延迟\n• 可调软启动 (SS)\n• 电源正常（PG）指示\n• 故障信号输出(FLTB)\n• 集成电流采样并提供采样输出（IMON）\n• 可调过压保护(OVP)阈值\n• 可调过流(OC)限制\n• 可调过流保护(OCP)故障调整时间\n• 输出短路保护 (SCP)\n• 过温保护 (OTP)\n• 保护模式：闭锁\n• 内置熔;

MPS

美国芯源

16V, 20A, 2.8mΩ RDS(ON), Hot-Swap Intelli-Fuse Solution

DESCRIPTION The MP5026 is a hot-swap protection device designed to protect circuitry on its output from transients on its input. It also protects its input from undesired shorts and transients from its output. The device can achieve up to 20A of continuous output current (IOUT) per device at room

文件：1.01082 Mbytes 页数：24 Pages

MPS

美国芯源

16V, 20A, 2.8mΩ RDS(ON), Hot-Swap Intelli-Fuse Solution

DESCRIPTION The MP5026 is a hot-swap protection device designed to protect circuitry on its output from transients on its input. It also protects its input from undesired shorts and transients from its output. The device can achieve up to 20A of continuous output current (IOUT) per device at room

文件：1.01082 Mbytes 页数：24 Pages

MPS

美国芯源