3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

文件：198.13 Kbytes 页数：3 Pages

MPS

美国芯源

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

文件：316.92 Kbytes 页数：13 Pages

MPS

美国芯源

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

文件：316.92 Kbytes 页数：13 Pages

MPS

美国芯源

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

文件：198.13 Kbytes 页数：3 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

文件：254.67 Kbytes 页数：9 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

文件：254.67 Kbytes 页数：9 Pages

MPS

美国芯源

Fixed Frequency WLED Driver Evaluation Board

GENERAL DESCRIPTION The EV1518DG-00A is an evaluation board for the MP1518, a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through

文件：167.58 Kbytes 页数：3 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

文件：254.67 Kbytes 页数：9 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

General Description The EV0056 evaluation board is designed for backlights using white LEDs. It implements MPS’ MP1518 fixed frequency step-up converter. Features ◾ On Board Power MOSFET ◾ Drives up to 6 Series White LEDs ◾ Up to 86 Efficiency ◾ Over 1MHz Fixed Switching Frequency ◾ Open Lo

文件：195.56 Kbytes 页数：3 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

文件：254.67 Kbytes 页数：9 Pages

MPS

美国芯源