CanalCompatible I2C Bus Controlled 4-input 3-output AV Switch

Outline This IC is a Canal+ compatible I2C bus controlled AV switch with 4-input 3-output developed for VCRs and DVD players for Europe. There are four models available, which are either stereo or mono (audio) with or without a clamp circuit (video). Features 1. I2C bus serial control 2. Inclu

文件：175.5 Kbytes 页数：13 Pages

MITSUMI

三美

CanalCompatible I2C Bus Controlled 4-input 3-output AV Switch

Outline This IC is a Canal+ compatible I2C bus controlled AV switch with 4-input 3-output developed for VCRs and DVD players for Europe. There are four models available, which are either stereo or mono (audio) with or without a clamp circuit (video). Features 1. I2C bus serial control 2. Inclu

文件：175.5 Kbytes 页数：13 Pages

MITSUMI

三美

IC for XO Monolithic IC

Outline This is a low current consumption, low operating voltage XO IC with Colpitz oscillation circuit. Smaller size is achieved by the on-chip bias circuit and Colpitz oscillation capacitor. Features 1. Low current consumption. 1.5mA max. (Vcc = 2.8V) 2. Low power supply operating voltage. V

文件：59 Kbytes 页数：5 Pages

MITSUMI

三美

Driver IC for Vibrators Monolithic IC MM1426

Outline This IC was developed as a driver for vibrator motors, and has an output voltage set at 1.3V. The input voltage is monitored, and if a constant voltage is not input the output is turned off. Features 1. Compact package for small mounting area. 2. In addition to output control through

文件：96.57 Kbytes 页数：5 Pages

MITSUMI

三美

Precision Adjustable Shunt Regulator

Outline The MM1530AT/AN is 3-termial adjustable shunt regulator, which provides a highly accurate 0.8 bandgap reference voltage. The output voltage can be adjusted to any value between reference voltage VREF and 12 volts with two external resistors. Moreover, there are a lot of ranges of the ap

文件：56.64 Kbytes 页数：5 Pages

MITSUMI

三美

Precision Adjustable Shunt Regulator

Outline The MM1530AT/AN is 3-termial adjustable shunt regulator, which provides a highly accurate 0.8 bandgap reference voltage. The output voltage can be adjusted to any value between reference voltage VREF and 12 volts with two external resistors. Moreover, there are a lot of ranges of the ap

文件：56.64 Kbytes 页数：5 Pages

MITSUMI

三美

Lithium-Ion Battery Charge Control (1 to 2 cells)

Outline This IC is used to control charging of lithium-ion batteries. This one IC incorporates functions for constant current and constant-voltage charging and for precharging, for an overcharge timer, battery temperature detection, and other protective functions. It was developed by adding to th

文件：204.46 Kbytes 页数：18 Pages

MITSUMI

三美

IC for Control of Lithium-ion Batteries Charging

Outline This IC is used to control charging of lithium-ion batteries. It is a one-chip charge control IC where the protection circuit incorporates constant-current/constant-voltage charge and precharge, overcharge timer, and battery temperature detection functions. It was developed by adding the

文件：343.07 Kbytes 页数：14 Pages

MITSUMI

三美

Lithium-Ion Battery Charge Control (1 to 2 cells)

Outline This IC is used to control charging of lithium-ion batteries. This one IC incorporates functions for constant current and constant-voltage charging and for precharging, for an overcharge timer, battery temperature detection, and other protective functions. It was developed by adding to th

文件：204.46 Kbytes 页数：18 Pages

MITSUMI

三美

RegulatorReset IC

Outline This IC combines a low saturation 5V regulator, adapted for low power consumption, and a reset function (regulator output monitoring), for which there is significant market need, that uses the built-in 4.2V detection delay circuit. Features 1. Small input/output voltage difference 0.25V

文件：118.67 Kbytes 页数：6 Pages

MITSUMI

三美