System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for D-RAM and dummy S-RAM battery back-up. D-RAM and dummy S-RAM power supplies differ from that of S-RAMs because 5V or 3.3V of power supply is required even during battery back-up. Therefore, these ICs provide voltage from a stable power supply during both norma

文件：63.95 Kbytes 页数：6 Pages

MITSUMI

三美

System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for STATIC-RAM (S-RAM) battery back-up, and have built-in switching circuit for main power supply and battery, back-up timing circuit and battery checker. Features 1. Battery back-up 1. Low IC current consumption (loss current) 0.3µA typ. 2. Dr

文件：121.6 Kbytes 页数：11 Pages

MITSUMI

三美

System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for STATIC-RAM (S-RAM) battery back-up, and have built-in switching circuit for main power supply and battery, back-up timing circuit and battery checker. Features 1. Battery back-up 1. Low IC current consumption (loss current) 0.3µA typ. 2. Dr

文件：121.6 Kbytes 页数：11 Pages

MITSUMI

三美

System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for STATIC-RAM (S-RAM) battery back-up, and have built-in switching circuit for main power supply and battery, back-up timing circuit and battery checker. Features 1. Battery back-up 1. Low IC current consumption (loss current) 0.3µA typ. 2. Dr

文件：121.6 Kbytes 页数：11 Pages

MITSUMI

三美

System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for STATIC-RAM (S-RAM) battery back-up, and have built-in switching circuit for main power supply and battery, back-up timing circuit and battery checker. Features 1. Battery back-up 1. Low IC current consumption (loss current) 0.3µA typ. 2. Dr

文件：121.6 Kbytes 页数：11 Pages

MITSUMI

三美

System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for STATIC-RAM (S-RAM) battery back-up, and have built-in switching circuit for main power supply and battery, back-up timing circuit and battery checker. Features 1. Battery back-up 1. Low IC current consumption (loss current) 0.3µA typ. 2. Dr

文件：121.6 Kbytes 页数：11 Pages

MITSUMI

三美

System Reset (with battery back-up) Monolithic IC

Outline These ICs were developed for STATIC-RAM (S-RAM) battery back-up, and have built-in switching circuit for main power supply and battery, back-up timing circuit and battery checker. Features 1. Battery back-up 1. Low IC current consumption (loss current) 0.3µA typ. 2. Dr

文件：121.6 Kbytes 页数：11 Pages

MITSUMI

三美

S Video Amplifier

Outline This is a video amp IC that supports S and also has a superimpose function. Amp gain is as follows : 6dB for Y signal amplification, 10dB for C signal amplification and 6dB for composite signal amplification. A 75Ω driver is built in. Features 1. Supports S-VHS 2. Built-in superimpose

文件：144.57 Kbytes 页数：5 Pages

MITSUMI

三美

Video Amplifier Monolithic IC

Outline This IC is a 6dB amp for video signals (Y or composite signals). Gain is fixed at 6dB and it is used in 75e signals). Gain is fixed at 6dB and it is used in 75Ω output circuits. Features 1. For video signal (Y or composite) amplification 2. Built-in clamp circuit 3. 75Ω dr

文件：92.65 Kbytes 页数：4 Pages

MITSUMI

三美

HBS-Compatible Driver and Receiver with Power Supply

Outline This IC conforms to the HBS (Home Bus) specification (Electronic Industries Association of Japan), and has functions for the reception and transmission of data. It incorporates power supply circuitry which employs an efficient switching regulator, and so can draw power directly from the b

文件：189.26 Kbytes 页数：6 Pages

MITSUMI

三美