MIW10-12S033M

DC-DC 电源转换器; • \n\n• 工业标准DIP-24包装\n\n• 2:1宽输入电压范围\n\n• 全稳压输出\n\n• 加强型绝缘，隔离耐压5000VAC，额定工作电压250Vrms\n\n• 沿面距离与空间距离达8mm\n\n• 低漏电流\n\n• 工作环境温度范围：-40 ℃至90 ℃\n\n• 无需最小负载\n\n• 具备输入低电压、输出过电流、输出过电压、输出短路保护机制\n\n• 内含传导性电磁干扰(EMI)滤波电路，并通过EN55011 Class A 认证\n\n• 通过第四版医疗EMC标准EMI EN55011 & EMS EN60601-1-2\n\n• 通过第三版医疗安规IEC/EN 60601-1 & ANSI/AAMI ES60601-1(2×MOPP)认证与CE标志\n\n;

The MINMAX MIW10M series is a new range of high performance 10W medical approved DC-DC converter within encapsulated DIP-24 package whichspecifically design for medical applications. There are 24 models available for input voltage of 12, 24, 48VDC with wide 2:1 input range and fixed outputvoltage. The I/O isolation is specified for 5000VAC with reinforced insulation, which rated for 250Vrms working voltage. Further features includeunder-voltage, overload, over voltage, short circuit protection, no min. load requirement, EMI emission EN 55011 class A approved, low leakage current 2μAmax. and operating ambient temp. range by -40℃ to 90℃ without derating by high efficiency up to 89%. MIW10M series conform to 4th edition medicalEMC standard, medical safety with 2xMOPP (Means Of Patient Protection) per 3rd edition of IEC/EN 60601-1 & ANSI/AAMI ES 60601-1 approved and8mm creepage and clearance. The MIW10M series offer the best solution for demanding applications in medical instrument requesting a certifiedsupplementary and reinforced insulation system to comply with latest medical safety approval for 2xMOPP requirement.

DCMJW10-12S033

10WattsDC/DCConverterSingleandDualOutputs

DCMJW10-12S033-HSHSR

10WattsDC/DCConverterSingleandDualOutputs

DCMJW10-12S033-HSR

10WattsDC/DCConverterSingleandDualOutputs