MIC4223数据手册集成电路（IC）的栅极驱动器规格书PDF

描述 Description

The MIC4223/MIC4224/MIC4225 are a family of a dual 4 A, high-speed, low-side MOSFET gate drivers with logic-level driver enables. The devices are fabricated on Bipolar/CMOS/DMOS (BCD) process and operate from a 4.5 V to 18 V supply voltage. The devices parallel Bipolar and CMOS output stage architecture provides high current throughout the MOSFETs gate Miller Region allowing the driver to sink and source 4 A of peak current from a 12 V supply and quickly charge and discharge a 2000 pF load capacitance in under 15 ns, while allowing the outputs to swing within 0.3 V of V DD and 0.16 V of ground. The MIC4223/MIC4224/MIC4225 driver and enable inputs feature TTL and CMOS logic-level thresholds which are independent of supply voltage. Each driver features a dedicated active-high enable input which is internally pulled high to VDD through 100 kΩ, allowing the pins to be left unconnected if it is not required to disable the driver outputs. The driver inputs have been designed to protect against ground bounce and are protected to withstand -5 V of voltage swing at -40 mA. Driver outputs are also protected to withstand 500 mA of reverse current. The MIC4223/MIC4224/MIC4225 are available in three configurations using industry standard pin out; dual inverting (MIC4223), dual non-inverting (MIC4224) and complimentary (MIC4225). They are available in 8-pin SOIC and thermally enhanced ePadD 8-pin MSOP and support operating junction temperatures from -40°C to +125°C.

特性 Features

• 4.5 V to 18 V supply voltage operating range
• High peak source/sink current
• ±3 A at VDD = 8 V
• ±4 A at VDD = 12 V
• 15 ns/15 ns rise and fall times with 2,000 pF load
• 25 ns/35 ns (rising/falling) input propagation delay
• 20 ns/45 ns (rising/falling) enable propagation delay
• Active-high driver enable inputs with 100kΩ pull-ups
• CMOS and TTL logic input and enable thresholds independent of supply voltage
• Driver input protection to -5 V at -40 mA
• Output latch-up protection to > 500 mA reverse current
• Industry standard pin out with two package options
• ePad MSOP-8 ( θJA = 60°C/W)
• 8-pin SOIC ( θJA = 120°C/W)
• Available in dual-inverting (MIC4223), dual non-inverting (MIC4224) and complementary (MIC4225)
• Dual output drive by paralleling channels
• -40°C to +125°C operating junction temperature range

简介

MIC4223属于集成电路（IC）的栅极驱动器。由制造生产的MIC4223栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。