MIC4104数据手册集成电路（IC）的栅极驱动器规格书PDF

描述 Description

The MIC4103 and MIC4104 are high frequency, 100 V Half Bridge MOSFET drivers with faster turn-off characteristics than the MIC4100 and MIC4101 drivers. They feature fast 24 ns propagation delay times and 6ns driver fall times. The low-side and high-side gate drivers are independently controlled and matched to within 3 ns typical. The MIC4103 has CMOS input thresholds and the MIC4104 has TTL input thresholds. The MIC4103/4 include a high voltage internal diode that charges the high-side gate drive bootstrap capacitor. A robust, high-speed, and low power level shifter provides clean level transitions to the high side output. The robust operation of the MIC4103/4 helps ensure the outputs are not affected by supply glitches, HS ringing below ground, or HS slewing with high speed voltage transitions. Under-voltage protection is provided on both the low-side and high-side drivers. The MIC4103 and MIC4104 are available in an 8-lead SOIC package with a operating junction temperature range of -40°C to +125°C.

特性 Features

• Asymmetrical, low impedance outputs drive 1,000 pF load with 10 ns rise times and 6 ns fall times
• Bootstrap supply max voltage to 118 V DC
• Supply voltage up to 16 V
• Drives high- and low-side N-Channel MOSFETs with independent inputs
• CMOS input thresholds (MIC4103)
• TTL input thresholds (MIC4104)
• On-chip bootstrap diode
• Fast 24 ns propagation times
• Low power consumption
• Supply under-voltage protection
• Typical 2.5 Ω pull up and 1.25 Ω pull down output driver resistance
• -40°C to +125°C junction temperature range

简介

MIC4104属于集成电路（IC）的栅极驱动器。由制造生产的MIC4104栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。