Single Ch-Target Tracker Gear Tooth Sensor

DESCRIPTION •Hall Effect Technology sensor for gear/ferrous target detection •Detects 0-32 pitch gears, bolt heads, holes in steel plates, and other ferrous targets •Single channel digital square wave output can resolve speed or count. For directional speed sensors, contact us. •NPN output goe

文件：602.94 Kbytes 页数：3 Pages

STANDEX

Hall Effect Gear Tooth Speed Sensor

DESCRIPTION •Hall Effect Technology sensor for gear/ferrous target detection •Detects 0-32 pitch gears, bolt heads, holes in steel plates, and other ferrous targets •Single channel digital square wave output can resolve speed or count. For directional speed sensors, contact us. •NPN output goe

文件：593.84 Kbytes 页数：3 Pages

STANDEX

Analog Hall Sensor

DESCRIPTION •The AH5 Analog Hall Sensor provides an analog output that changes in relation to the magnetic field strength perpendicular to the sensor's face. These sensors are polarity sensitive. •No field present provides a 2.5V output (offset voltage), this output changes by 5.0 mV per gauss (

文件：599.26 Kbytes 页数：3 Pages

STANDEX

Angular Position Sensor

DESCRIPTION •Sensor provides 0-5V analog output over 90 degrees of rotation. •Non-contact sensor detects marked magnet to define orientation. •Load dump protected circuit operates from 8-32VDC •Ratiometricoutput to internal 5V regulator, analog ref. output wire can be connected for regulator t

文件：747.42 Kbytes 页数：3 Pages

STANDEX

Angular Position Sensor

DESCRIPTION •Sensor provides 0-5V analog output over 180 degrees of rotation. •Non-contact sensor detects marked magnet to define orientation. •Load dump protected circuit operates from 8-32VDC •Ratiometricoutput to internal 5V regulator, analog ref. output wire can be connected for regulator

文件：747.72 Kbytes 页数：3 Pages

STANDEX

Angular Position Sensor

DESCRIPTION •Sensor provides 0-5V analog output over 360 degrees of rotation. •Non-contact sensor detects marked magnet to define orientation. •Load dump protected circuit operates from 8-32VDC •Ratiometricoutput to internal 5V regulator, analog ref. output wire can be connected for regulator

文件：752.19 Kbytes 页数：3 Pages

STANDEX

Dual Output Hall Switch Sensor

-Dual output hall switch -55 gauss operate (1 output for N pole, 1 output for S pole) -NPN output with 5k pull up resistor -Plastic .7” flange mount 1.5” long housing -Deutsch DT04 4 pin with 5” 20 AWG XLPE

文件：632.93 Kbytes 页数：3 Pages

STANDEX

Metal Film MELF Resistor

文件：428.34 Kbytes 页数：2 Pages

MERITEK

Metal Film MELF Resistor

文件：428.34 Kbytes 页数：2 Pages

MERITEK

Metal Film MELF Resistor

文件：428.34 Kbytes 页数：2 Pages

MERITEK