Single-Ended, Rail-to-Rail I/O, Low Gain PGA

Description The Microchip Technology Inc. MCP6S21/2/6/8 are analog Programmable Gain Amplifiers (PGA). They can be configured for gains from +1 V/V to +32 V/V and the input multiplexer can select one of up to eight channels through an SPI port. The serial interface can also put the PGA into shutd

文件：880.79 Kbytes 页数：43 Pages

Microchip

微芯科技

Single-Ended, Rail-to-Rail I/O, Low Gain PGA

文件：761.32 Kbytes 页数：42 Pages

Microchip

微芯科技

Single-Ended, Rail-to-Rail I/O, Low Gain PGA

The MCP6S21, MCP6S22, MCP6S26, and MCP6S28 Programmable Gain Amplifiers offer 1, 2, 6 or 8 input channels respectively and eight steps of gain. These devices are programmable over an SPI bus and thus add gain control and input channel selection to the embedded control system. This is all achieved in SPI Bus to Control Gain and Select Input Channel \nGain Steps of 1, 2, 4, 5, 8, 10, 16 and 32 V/V\n-3 dB Bandwidth of 2 to 12 MHz\nVOS Gain Error Rail-to-Rail Input and Output\nLow Noise: 10 nV/rHz\nLow Supply Current: 1.1 mA (typical)\nSingle Supply 2.5V to 5.5V\nIndustrial Temperature Range: -40°C;

Microchip

微芯科技

Single-Ended, Rail-to-Rail I/O, Low Gain PGA

文件：761.32 Kbytes 页数：42 Pages

Microchip

微芯科技