MC14511

BCD-TO-SEVEN SEGMENT  LATCH/DECODER/DRIVER; • Low Logic Circuit Power Dissipation \n• High–Current Sourcing Outputs (Up to 25 mA) \n• Latch Storage of Code \n• Blanking Input \n• Lamp Test Provision \n• Readout Blanking on all Illegal Input Combinations \n• Lamp Intensity Modulation Capability \n• Time Share (Multiplexing) Facility \n• Supply Voltage Range = 3.0 V ~ 18 V \n• Capable of Driving Two Low-power TTL Loads, One Low-power Schottky TTL Load or Two HTL Loads Over the Rated Temperature Range \n• Chip Complexity: 216 FETs or 54 Equivalent Gates \n• Triple Diode Protection on all Inputs;

The UTC MC14511 BCD–to–seven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the functions of a 4-bit storage latch, an 8421 BCD-to-seven segment decoder, and an output drive capability. Lamp test (LT), blanking (BI), and latch enable (LE) inputs are used to test the display, to turn-off or pulse modulate the brightness of the display, and to store a BCD code, respectively. It can be used with seven-segment light-emitting diodes (LED), incandescent, fluorescent, gas discharge, or liquid crystal readouts either directly or indirectly. Applications include instrument (e.g., counter, DVM, etc.) display driver, computer/calculator display driver, cockpit display driver, and various clock, watch, and timer uses.

MC14511

BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER

MC14511

BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER

MC145112

CMOS LSI (LOW-POWER COMPLEMENTARY MOS) PLL FREQUENCY SYNTHESIZERS

CMOSLSI(LOW-POWERCOMPLEMENTARYMOS)

MC145112P

CMOS LSI (LOW-POWER COMPLEMENTARY MOS) PLL FREQUENCY SYNTHESIZERS

CMOSLSI(LOW-POWERCOMPLEMENTARYMOS)

MC14511B

BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER

TheMC14511BBCD−to−sevensegmentlatch/decoder/driverisconstructedwithcomplementaryMOS(CMOS)enhancementmodedevicesandNPNbipolaroutputdriversinasinglemonolithicstructure.Thecircuitprovidesthefunctionsofa4−bitstoragelatch,an8421BCD−to−sevensegmentdecoder,andanou

MC14511B

BCD-To-Seven Segment Latch/Decoder/Driver

TheMC14511BBCD–to–sevensegmentlatch/decoder/driverisconstructedwithcomplementaryMOS(CMOS)enhancementmodedevicesandNPNbipolaroutputdriversinasinglemonolithicstructure. Applicationsincludeinstrument(e.g.,counter,DVM,etc.)displaydriver,computer/calculatordisplaydriv

MC14511B

BCD−To−Seven Segment Latch/Decoder/Driver; • Low Logic Circuit Power Dissipation\n• High−Current Sourcing Outputs (Up to 25 mA)\n• Latch Storage of Code\n• Blanking Input\n• Lamp Test Provision\n• Readout Blanking on all Illegal Input Combinations\n• Lamp Intensity Modulation Capability\n• Time Share (Multiplexing) Facility\n• Supply Voltage Range = 3.0 V to 18 V\n• Capable of Driving Two Low−power TTL Loads, One Low−power Schottky TTL Load, or Two HTL Loads Over the Rated Temperature Range\n• Chip Complexity: 216 FETs or 54 Equivalent Gates\n• Triple Diode Protection on all Inputs\n• Pb−Free Packages are Available* ;

The MC14511B BCD−to−seven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the functions of a 4−bit storage latch, an 8421 BCD−to−seven segment decoder, and an output drive capability. Lamp test (LT), blanking (BI), and latch enable (LE) inputs are used to test the display, to turn−off or pulse modulate the brightness of the display, and to store a BCD code, respectively. It can be used with seven−segment light−emitting diodes (LED), incandescent, fluorescent, gas discharge, or liquid crystal readouts either directly or indirectly.\nApplications include instrument (e.g., counter, DVM, etc.) display driver, computer/calculator display driver, cockpit display driver, and various clock, watch, and timer uses.

恩XP

MC14511B

BCD-7 段锁存/解码器/驱动器; • Low Logic Circuit Power Dissipation\n• High-Current Sourcing Outputs (Up to 25 mA)\n• Latch Storage of Code\n• Blanking Input\n• Lamp Test Provision\n• Readout Blanking on all Illegal Input Combinations\n• Lamp Intensity Modulation Capability\n• Time Share (Multiplexing) Facility\n• Supply Voltage Range = 3.0 V to 18 V\n• Capable of Driving Two Low-power TTL Loads, One Low-power Schottky TTL Load or Two HTL Loads Over the Rated Temperature Range\n• Chip Complexity: 216 FETs or 54 Equivalent Gates\n• Triple Diode Protection on all Inputs\n• These devices are available in Pb-free package(s). Specifications herein apply to both standard and Pb-free devices. Please see our website at www.onsemi.com for specific Pb-free orderable part numbers, or contact your local ON Semiconductor sales office or representative.\n;

The MC14511B BCD-to-seven segment latch/decoder/driver is constructed with complementary MOS (CMOS) enhancement mode devices and NPN bipolar output drivers in a single monolithic structure. The circuit provides the functions of a 4-bit storage latch, an 8421 BCD-to-seven segment decoder, and an output drive capability. Lamp test (LTbar), blanking (BIbar), and latch enable (LE) inputs are used to test the display, to turn-off or pulse modulate the brightness of the display, and to store a BCD code, respectively. It can be used with seven-segment light-emitting diodes (LED), incandescent, fluorescent, gas discharge, or liquid crystal readouts either directly or indirectly. Applications include instrument (e.g., counter, DVM, etc.) display driver, computer/calculator display driver, cockpit display driver, and various clock, watch, and timer uses.

MC14511BCL

BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER

TheMC14511BBCD−to−sevensegmentlatch/decoder/driverisconstructedwithcomplementaryMOS(CMOS)enhancementmodedevicesandNPNbipolaroutputdriversinasinglemonolithicstructure.Thecircuitprovidesthefunctionsofa4−bitstoragelatch,an8421BCD−to−sevensegmentdecoder,andanou