MC100EP16VB

Differential Driver / Receiver with High and Low Gain; • 300 ps Typical Propagation Delay\n• Gain > 200\n• Maximum Frequency > 3 GHz Typical\n• PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V\n• NECL Mode Operating Range: VCC = 0 V with VEE = –3.0 V to –5.5 V\n• VBB Output\n;

The EP16VB is a world-class differential receiver/driver. The device is functionally equivalent to the EP16 and LVEP16 devices but with both high and low gain outputs. QHG and QHGbar outputs have a DC gain several times larger than the DC gain of an EP16. Qbar output is provided for feedback purposes.The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.Special considerations are required for differential inputs under No Signal conditions to prevent instability.The 100 Series contains temperature compensation.

MC100EP16VB

3.3V / 5V ECL Differential Receiver/Driver with High and Low Gain

MC100EP16VB_16

3.3 V / 5 V ECL Differential Receiver/Driver

MC100EP16VBD

Evaluation Board Manual for High Frequency SOIC 8

MC100EP16VBD

3.3V / 5V ECL Differential Receiver/Driver with High and Low Gain

MC100EP16VBDG

3.3V / 5V ECL Differential Receiver/Driver with High and Low Gain

MC100EP16VBDG

3.3 V / 5 V ECL Differential Receiver/Driver

MC100EP16VBDR2

3.3V / 5V ECL Differential Receiver/Driver with High and Low Gain

MC100EP16VBDR2G

3.3V / 5V ECL Differential Receiver/Driver with High and Low Gain

MC100EP16VBDR2G

3.3 V / 5 V ECL Differential Receiver/Driver