MC100EP16F

MC100EP16F: Differential Driver / Receiver With Reduced Output Swing; 100 ps Typical Rise and Fall Time\nMax Frequency >4 GHz\nPECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE = 0 V\nNECL Mode Operating Range: VCC= 0V with VEE = -3.0 V to -5.5 V\nOpen Input Default State\nSafety Clamp on Inputs\n;

The MC100EP16F is a differential receiver/driver. The device is functionally equivalent to the EP16 device with higher performance capabilities. With reduced output swings, rise/fall transition times are significantly faster than on the EP16. The EP16F is ideally suited for interfacing with high frequency sources.The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.

MC100EP16F

3.3V / 5V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16F_16

3.3 V / 5 V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16FD

3.3V / 5V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16FD

Evaluation Board Manual for High Frequency SOIC 8

MC100EP16FDG

3.3V / 5V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16FDG

3.3 V / 5 V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16FDR2

3.3V / 5V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16FDR2G

3.3V / 5V ECL Differential Receiver/Driver With Reduced Output Swing

MC100EP16FDR2G

3.3 V / 5 V ECL Differential Receiver/Driver With Reduced Output Swing