Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX985/MAX986/MAX989/MAX990/MAX993/MAX994 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltages range from 2.5V to 5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：453.1 Kbytes 页数：13 Pages

Maxim

美信

Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators

文件：342.77 Kbytes 页数：13 Pages

Maxim

美信

Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators

文件：309.25 Kbytes 页数：12 Pages

Maxim

美信

微功耗、低电压、UCSP/SC70封装、满摆幅输入/输出比较器

MAX985/MAX986/MAX989/MAX990/MAX993/MAX994单/双/四微功耗比较器可低电压工作，输入输出可达满摆幅。工作电压范围为2.5V至5.5V，适用于采用3V和5V电源的系统。它们也可工作于±1.25V至±2.75V的双电源下。电流消耗仅为11µA，传输延迟时间为300ns。\n\n 典型输入偏置电流为1.0pA，典型输入失调电压为0.5mV。内部滞回可保证即使在慢输入信号下也能实现干净的输出切换。\n\n 独特的输出级设计可以限制开关时的电源浪涌电流，从根本上消除了电源扰动(普遍存在于其他类型的比较器)。MAX985/MAX989/MAX993 • 低静态电流：11µA\n• 2.5V至5.5V单电源供电\n• 共模输入电压范围可超出电源250mV\n• 300ns传输延迟\n• 推挽式输出级吸收和源出电流能力达8mA (MAX985/MAX989/MAX993)\n• 开漏输出电压可超过VCC (MAX986/MAX990/MAX994)\n• 独特的输出级设计减小了输出切换电流，降低了总功耗\n• 1MHz开关频率时，电源电流80µA\n• 输入过驱动时不发生输出反相\n• 提供节省空间的封装：\n• UCSP封装(MAX985)\n• SOT23封装(MAX985/MAX986/MAX989/MAX990)\n• µMAX®封装;

ADI

亚德诺

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ♦

文件：232.46 Kbytes 页数：15 Pages

Maxim

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ♦

文件：232.46 Kbytes 页数：15 Pages

Maxim

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ♦

文件：232.46 Kbytes 页数：15 Pages

Maxim

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ♦

文件：232.46 Kbytes 页数：15 Pages

Maxim

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ♦

文件：232.46 Kbytes 页数：15 Pages

Maxim

美信

2MHz to 1.6GHz 45dB RF-Detecting Controllers and RF Detector

General Description The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. Features ♦

文件：232.46 Kbytes 页数：15 Pages

Maxim

美信