High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：141.82 Kbytes 页数：12 Pages

Maxim

美信

High-Speed, Micropower, Low-Voltage

General Description The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：329.88 Kbytes 页数：13 Pages

Maxim

美信

High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail IO Comparators

文件：329.88 Kbytes 页数：13 Pages

Maxim

美信

High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

文件：329.88 Kbytes 页数：13 Pages

Maxim

美信

高速、微功耗、低压、轨到轨I/O比较器

MAX987/MAX988/MAX991/MAX992/MAX995/MAX996单通道/双通道/四通道微功耗比较器具有低电压工作和轨到轨输入和输出。其工作电压范围为+2.5V至+5.5V，因此非常适合用于3V和5V系统。这些比较器还采用±1.25V至±2.75V双电源供电。每个比较器的电流消耗仅为48µA，同时实现120ns传播延迟。\n\n 输入偏置电流典型值为1.0pA，输入失调电压典型值为0.5mV。即便输入信号传送缓慢，内部迟滞也能确保干净的输出切换。\n\n 输出级的专门设计限制了开关时的电源电流浪涌，几乎消除了许多其他比较器常见的电源毛刺。MAX987/MAX • 传输延迟：120ns\n\n• 静态电源电流：48µA\n\n• +2.5V至+5.5V单电源供电\n\n• 共模输入电压范围扩展至供电轨以上250mV\n\n• 推挽输出级的灌电流和拉电流为8mA (MAX987/MAX991/MAX995)\n\n• 开漏输出电压超出VCC (MAX988/MAX992/MAX996)\n\n• 专门设计的输出级可降低输出开关电流，从而充分降低总体功耗\n\n• 1MHz开关频率下的电源电流为100µA\n\n• 过驱输入无反相\n\n• 采用节省空间的封装：\n• 5引脚SC70 (MAX987/MAX988)\n\n• 8引脚µMAX (MAX99;

ADI

亚德诺

-20V to 75V Input Range, Precision Uni-/Bidirectional, Current-Sense Amplifiers

General Description The MAX9918/MAX9919/MAX9920 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode range that extends from -20V to +75V. These amplifiers are well suited for current moni toring of inductive loads such as motors and solenoids, where common-mo

文件：2.16922 Mbytes 页数：17 Pages

Maxim

美信

-20V to 75V Input Range, Precision Uni-/Bidirectional, Current-Sense Amplifiers

General Description The MAX9918/MAX9919/MAX9920 are single-supply, high-accuracy current-sense amplifiers with a high input common-mode range that extends from -20V to +75V. These amplifiers are well suited for current moni toring of inductive loads such as motors and solenoids, where common-mo

文件：2.16922 Mbytes 页数：17 Pages

Maxim

美信

Dual, 2-Wire Hall-Effect Sensor Interface with Diagnostics

General Description The MAX9921 provides a single chip solution to interface two 2-wire Hall-effect sensors to a low-voltage microprocessor (µP). This device supplies and monitors the current drawn by two Hall-effect sensors, filters the sensed current level, and outputs the corresponding logic l

文件：745.94 Kbytes 页数：16 Pages

Maxim

美信

Dual, 2-Wire Hall-Effect Sensor Interface with Diagnostics

General Description The MAX9921 provides a single chip solution to interface two 2-wire Hall-effect sensors to a low-voltage microprocessor (µP). This device supplies and monitors the current drawn by two Hall-effect sensors, filters the sensed current level, and outputs the corresponding logic l

文件：745.94 Kbytes 页数：16 Pages

Maxim

美信

Dual, 2-Wire Hall-Effect Sensor Interface with Diagnostics

General Description The MAX9921 provides a single chip solution to interface two 2-wire Hall-effect sensors to a low-voltage microprocessor (µP). This device supplies and monitors the current drawn by two Hall-effect sensors, filters the sensed current level, and outputs the corresponding logic l

文件：745.94 Kbytes 页数：16 Pages

Maxim

美信