Ultra-Low-Power, Single-Supply Op Amp Comparator Reference

General Description The MAX951–MAX954 feature combinations of a micropower operational amplifier, comparator, and reference in an 8-pin package. In the MAX951 and MAX952, the comparator’s inverting input is connected to an internal 1.2V ±2 bandgap reference. The MAX953 and MAX954 are offered with

文件：114.27 Kbytes 页数：12 Pages

Maxim

美信

Ultra-Low-Power, Single-Supply Op Amp Comparator Reference

文件：1.99478 Mbytes 页数：13 Pages

Maxim

美信

超低功耗、单电源运算放大器+比较器+基准电压源

MAX951–MAX954在8引脚封装中集成了微功耗运算放大器、比较器和基准电压源。在MAX951和MAX952中，比较器的反相输入连接到1.2V±2%内部带隙基准电压源。MAX953和MAX954不带内部基准电压源。MAX951/MAX952采用2.7V至7V单电源供电，典型电源电流为7µA，而MAX953/MAX954采用2.4V至7V单电源供电，典型电源电流为5µA。运算放大器和比较器的共模输入电压范围均从负供电轨扩展至正供电轨的1.6V范围内，且支持轨到轨输出级摆幅。\n\n MAX951/MAX953中的运算放大器经过内部补偿，单位增益稳定，而MAX952/MAX9 • 运算放大器+比较器+基准电压源，采用8引脚µMAX®封装(MAX951/MAX952)\n\n• 7µA典型电源电流（运算放大器+比较器+基准电压源）\n\n• 比较器和运算放大器输入范围包括低电压\n\n• 轨到轨输出摆幅\n\n• 电源电压范围：2.4V至7V\n\n• 单位增益稳定和125kHz非完全补偿AV> 10V/V运算放大器选项\n\n• 1.2V±2%内部带隙基准电压源\n\n• 内部比较器迟滞\n\n• 运算放大器能够驱动高达1000pF的负载;

ADI

亚德诺

Graphics Video Sync Adder/Extractor

General Description The MAX9539/MAX9540 chipset provides a 3-wire (RGB) interface for 5-wire (RGBHV) video by adding and extracting the H, V, and composite sync from the graphics video signals. This chipset eliminates the problem of sync-to-video timing (skew errors) in a 5-wire interface, while

文件：216.85 Kbytes 页数：15 Pages

Maxim

美信

Graphics Video Sync Adder/Extractor

General Description The MAX9539/MAX9540 chipset provides a 3-wire (RGB) interface for 5-wire (RGBHV) video by adding and extracting the H, V, and composite sync from the graphics video signals. This chipset eliminates the problem of sync-to-video timing (skew errors) in a 5-wire interface, while

文件：216.85 Kbytes 页数：15 Pages

Maxim

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 页数：16 Pages

Maxim

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 页数：16 Pages

Maxim

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 页数：16 Pages

Maxim

美信

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

General Description The MAX9541/MAX9542 are quadruple-channel, 2:1 video mux amplifiers with input sync tip clamps. These devices select between two video sources and support up to four channels on each source. Features ● Quad 2:1 Video Mux Amplifiers ● Reconstruction Filters with 9.5MHz Passb

文件：347.25 Kbytes 页数：16 Pages

Maxim

美信

Differential Video Interface Chipset

General Description The MAX9546/MAX9547 differential interface chipset converts single-ended voltages to differential voltages for transport and then converts back to single-ended voltages. These devices eliminate costly, bulky, single-ended coaxial cables with inexpensive, readily available, dif

文件：251.5 Kbytes 页数：12 Pages

Maxim

美信