功能完备的微处理器监控电路，提供±1.5%的复位门限精度

MAX807微处理器(µP)监控电路减少了监控µP系统中的电源和电池控制功能所需的复杂性和元件数量。MAX807具有70µA电源电流，因此非常适合用于便携式设备，同时具有2ns芯片使能传播延迟和250mA输出电流能力（备用电池模式下为20mA），也适用于更大、更高性能的设备。\n\n MAX807采用16引脚DIP、SO和TSSOP封装，同时提供以下功能：\n\nµP复位。低电平有效RESET输出在上电、关断和掉电情况下置位，并保证在VCC低至1V时处于正确的状态。高电平有效RESET输出。手动复位输入。两级电源故障警告。通过一个单独的低电平比较器将VCC与高于复位阈值52mV的阈值 • 精密4.675V (MAX807L)、4.425V (MAX807M)或4.575V (MAX807N)电压监控\n\n• 200ms电源正常/复位时间延迟\n\n• 反RESET和RESET输出\n\n• 独立看门狗定时器\n\n• 待机电流：1µA\n\n• 电源开关\n• VCC 模式下为250mA\n\n• 备用电池模式下为20mA\n\n\n\n\n• 芯片使能信号板载选通；\n• 2ns CE栅极传播延迟\n\n\n\n\n• 与MaxCap®和SuperCap兼容\n\n• 电压监控器，监控电源有无故障\n\n• 备用电池监控器\n\n• 低至VCC = 1V时确保低电平有效;

ADI

亚德诺

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信

Full-Featured uP Supervisory Circuit with /-1.5 Reset Accuracy

General Description The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable pr

文件：232.07 Kbytes 页数：16 Pages

Maxim

美信