Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

电源监测器，带有复位

MAX700/MAX701/MAX702监控电路用于监控微处理器(µP)和数字系统中的电源。VCC电压低至+1V时，MAX700/MAX701/MAX702的低电平有效RESET/RESET输出能处于正确的状态（图4）。当与+5V供电电路一起使用时，它们无需外部元件，也不用进行调整，可实现非常可靠的低成本电路。\n\n MAX702是该系列中的简易器件。当VCC降至4.65V时，低电平有效RESET变为低电平。MAX702还提供去抖手动复位输入。MAX701执行相同的功能，但具有低电平有效RESET和RESET输出。其主要功能是提供系统复位。因此，在低电源电压达到其工作值后，为该电源 • 上电、关断和低电压条件下的低电平有效复位脉冲最小值为200ms\n\n• 用于+5V系统的工厂调整复位阈值\n\n• +5V供电电路无需外部元件或调整\n\n• 去抖手动复位输入\n\n• 预设或可调电压检测(MAX700)\n\n• 可调迟滞(MAX700)\n\n• 8引脚PDIP和窄型SO封装;

ADI

亚德诺

Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

Power-Supply Monitor with Reset

General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide

文件：133.67 Kbytes 页数：4 Pages

Maxim

美信

Power-Supply Monitor with Reset

文件：84.22 Kbytes 页数：6 Pages

Maxim

美信

Power-Supply Monitor with Reset

文件：255.19 Kbytes 页数：6 Pages

Maxim

美信