Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

微处理器监控复位电路，带有边沿触发、单稳态手动复位

MAX6467/MAX6468微处理器(µP)监控电路用于监视+1.8V至+5.0V的单电源电压，当电源电压降低到预置门限以下时产生复位。边沿触发、单稳态手动复位功能即使在持续不断地触发手动复位的情况下也能保证µP只在固定的延时周期内进入复位状态。与传统的手动复位监控电路相比，MAX6467/MAX6468有效改善了系统的可靠性。\n\n 多种工厂预置门限可满足不同的电源电压和容差要求，无需外部元件。+1.575V至+4.625V的工厂预置门限可用于监视+5.0V、+3.3V、+3.0V、+2.5V或+1.8V、具有不同容差的电源。150ms (最小)和1200ms (最小)的复位延 • 为+5.0V、+3.3V、+3.0V、+2.5V和+1.8V电源提供精确的工厂预置复位门限\n• 两种复位延时周期选择(最小150ms或1200ms)\n• 低电源电流(VCC = +1.8V时，3µA)\n• 低有效、漏极开路或推挽式/RESET输出\n• 微型4引脚SC70和SOT143封装\n• 引脚兼容于MAX811、MAX6315、MAX6384和MAX6386\n• 通过AEC-Q100认证，详情请参阅特定/ V部件的订购信息;

ADI

亚德诺

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信

Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset

General Description The MAX6467/MAX6468 microprocessor (µP) supervisory circuits monitor single power-supply voltages from +1.8V to +5.0V and assert a reset if the supply voltage drops below its preset threshold. An edge-triggered, one-shot manual reset function ensures that the µP enters the res

文件：265.21 Kbytes 页数：9 Pages

Maxim

美信