高性能、单端、电流模式PWM控制器

MAX5094A/B/C/D/MAX5095A/B/C BiCMOS、高性能、电流模式PWM控制器具有宽输入电压范围隔离/非隔离电源所需的所有特性。这些控制器非常适用于低功率和大功率通用电源及电信电源。\n\n MAX5094/MAX5095含有一个快速比较器，从电流检测端到输出的延时通常仅为60ns，用于过流保护功能。MAX5094内置一个误差放大器，在COMP端产生输出。采用外部元件控制COMP电压的上升可以实现软启动。\n\n 通过外部电阻和电容可以调节振荡器的频率，范围在20kHz至1MHz之间。定时电容的放电电流经过了微调，可以在给定频率下设定死区时间和最大占空比 • 引脚兼容于UCC28C43 (MAX5094A)和UCC28C45 (MAX5094B)，可直接替换 \n• 2A源出电流和1A吸收电流的驱动能力 \n• 高达1MHz的开关工作频率 \n• 双向频率同步(MAX5095A/MAX5095B) \n• 超前的输出驱动用于二次侧同步整流(MAX5095C) \n• 60ns快速逐周期限流 \n• 微调的振荡器电容放电电流可精确地设置最大占空比 \n• 带有0.8V滞回，精度可达±5%的启动电压 \n• 32µA低启动电流 \n• 5V稳压器输出(REF)，20mA驱动能力 \n• 具有0.3V检流门限版本\n• 过热关断;

ADI

亚德诺

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信

High-Performance, Single-Ended, Current-Mode PWM Controllers

General Description The MAX5094A/B/C/D/MAX5095A/B/C BiCMOS, high performance, current-mode PWM controllers have all the features required for wide input-voltage range isolated/nonisolated power supplies. These controllers are used for low- and high-power universal input voltage and telecom power

文件：296.11 Kbytes 页数：22 Pages

MAXIM

美信