Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

文件：223.34 Kbytes 页数：8 Pages

MAXIM

美信

集成推挽式FET驱动器，带有振荡器和时钟输出

MAX5075是一款内置振荡器的+4.5V至+15V推挽式电流馈电拓扑驱动器子系统，适用于电信模块电源。该器件可驱动与中心抽头变压器原边相连的两个MOSFET，为副边提供隔离的负电压或正电压。该器件内部集成可编程的精确振荡器，具有同步时钟输出，可用于同步外部PWM调节器。通过单个外部电阻编程设置内部振荡器频率，范围为50kHz至1.5MHz。\n\n MAX5075内部集成有峰值驱动电流为±3A和占空比为50%的双MOSFET驱动器。该MOSFET驱动器产生互补信号来驱动以地为参考的外部n沟道MOSFET。\n\n MAX5075时钟输出频率与MOSFET驱动器频率 • 电流馈电、推挽式驱动器子系统\n• 可编程、精确的内部振荡器\n• +4.5V至+15V单电源\n• 双路±3A栅极驱动输出\n• 在250kHz频率下，并且无容性负载时，工作电流为1mA\n• 同步时钟频率选择\n• 热增强型8引脚µMAX封装\n• 工作温度范围为-40°C至+125°C;

ADI

亚德诺

Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

General Description The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative o

文件：234.85 Kbytes 页数：8 Pages

MAXIM

美信

Push-Pull FET Driver with Integrated Oscillator and Clock Output

文件：223.34 Kbytes 页数：8 Pages

MAXIM

美信