Quad 8-Bit DACs with Rail-to-Rail Voltage Outputs

Quad 8-Bit DACs with Rail-to-Rail Voltage Outputs

文件：554.68 Kbytes 页数：16 Pages

Maxim

美信

四路、8位DAC，满摆幅输出

MAX505和MAX506均为CMOS、四通道、8位电压输出数模转换器(DAC)。这些器件采用+5V单电源或±5V双电源供电。内部精密输出缓冲器提供轨到轨摆幅。基准输入范围包括两个供电轨。偏移、增益和线性度均经过工厂校准，可在整个工作温度范围内提供1 LSB总不可调整误差(TUE)。\n\n MAX505包含双缓冲逻辑输入，支持使用异步负载DAC（低电平有效LDAC）控制信号同时更新所有模拟输出。MAX505还具有四个独立的基准输入，便于独立设置每个DAC的满量程范围。MAX506的四个DAC各自均具有独立的输入锁存器。数据从一个共用的8位输入端口传输到输入锁存器。这些DAC通过地址 • 采用+5V单电源或±5V双电源供电\n\n• 输出缓冲放大器提供轨到轨摆幅\n\n• 基准输入范围包括两个供电轨\n\n• 工厂校准为1 LSB TUE\n\n• 双缓冲数字输入(MAX505)\n\n• 微处理器和TTL/CMOS兼容\n\n• 无需外部调整\n\n• MX7225/MX7226的引脚兼容升级版本\n\n• 现采用小型SSOP封装;

ADI

亚德诺

Parallelable, Clamped Two-Switch Power-Supply Controller IC

General Description The MAX5051 is a clamped, two-switch power-supply controller IC. This device can be used both in forward or flyback configurations with input voltage ranges from 11V to 76V. It provides comprehensive protection mechanisms against possible faults, resulting in very high reliabi

文件：568.08 Kbytes 页数：21 Pages

Maxim

美信

Parallelable, Clamped Two-Switch Power-Supply Controller IC

General Description The MAX5051 is a clamped, two-switch power-supply controller IC. This device can be used both in forward or flyback configurations with input voltage ranges from 11V to 76V. It provides comprehensive protection mechanisms against possible faults, resulting in very high reliabi

文件：568.08 Kbytes 页数：21 Pages

Maxim

美信

Current-Mode PWM Controllers with an Error Amplifier for Isolated/Nonisolated Power Supplies

General Description The MAX5052/MAX5053 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX5052 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) po

文件：349.59 Kbytes 页数：13 Pages

Maxim

美信

Current-Mode PWM Controllers with an Error Amplifier for Isolated/Nonisolated Power Supplies

General Description The MAX5052/MAX5053 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX5052 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) po

文件：349.59 Kbytes 页数：13 Pages

Maxim

美信

Current-Mode PWM Controllers with an Error Amplifier for Isolated/Nonisolated Power Supplies

General Description The MAX5052/MAX5053 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX5052 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) po

文件：349.59 Kbytes 页数：13 Pages

Maxim

美信

Current-Mode PWM Controllers with an Error Amplifier for Isolated/Nonisolated Power Supplies

General Description The MAX5052/MAX5053 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX5052 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) po

文件：349.59 Kbytes 页数：13 Pages

Maxim

美信

Current-Mode PWM Controllers with an Error Amplifier for Isolated/Nonisolated Power Supplies

General Description The MAX5052/MAX5053 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX5052 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) po

文件：349.59 Kbytes 页数：13 Pages

Maxim

美信

Current-Mode PWM Controllers with an Error Amplifier for Isolated/Nonisolated Power Supplies

General Description The MAX5052/MAX5053 current-mode PWM controllers contain all the control circuitry required for the design of wide-input-voltage isolated and nonisolated power supplies. The MAX5052 is well suited for universal input (rectified 85VAC to 265VAC) or telecom (-36VDC to -72VDC) po

文件：349.59 Kbytes 页数：13 Pages

Maxim

美信