Single/Dual/Quad, Micropower, Single-Supply Rail-to-Rail Op Amps

General Description The dual MAX492, quad MAX494, and single MAX495 operational amplifiers combine excellent DC accuracy with rail-to-rail operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (+2.7V to +6V)

文件：230.88 Kbytes 页数：16 Pages

Maxim

美信

单/双/四路、微功耗、单电源、满摆幅运算放大器

双通道MAX492、四通道MAX494和单通道MAX495运算放大器不仅具有出色的直流精度，还提供输入和输出端的轨到轨操作。由于共模电压从VCC扩展至VEE，因此器件可以采用单电源（+2.7V至+6V）或分离电源（±1.35V至±3V）供电。每个运算放大器所需的电源电流小于150µA。即使在如此低的电流下，运算放大器也能够驱动1kΩ负载，并且折合到输入端的电压噪声仅为25nV/√Hz。此外，这些运算放大器还可以驱动超过1nF的负载。\n\n MAX492/MAX494/MAX495不仅具有精密性能，还具有宽输入和输出动态范围，采用低压单电源供电并提供超低的电源电流，因此成为了电池供电 • 低压单电源供电（+2.7V至+6V）\n\n• 轨到轨输入共模电压范围\n\n• 轨到轨输出摆幅\n\n• 增益带宽积：500kHz\n\n• 单位增益稳定\n\n• 每个运算放大器的静态电流：150µA（最大值）\n\n• 过驱输入无反相\n\n• 失调电压：200µV\n\n• 高压增益(108dB)\n\n• 高CMRR (90dB)和PSRR (110dB)\n\n• 驱动1kΩ负载\n\n• 驱动大容性负载\n\n• MAX495采用µMAX封装——8引脚SO封装\n\n• 双通道精密轨到轨输入和输出(MAX492)\n\n• 四通道精密轨到轨输入和输出(MAX494)\n\n•;

ADI

亚德诺

Overvoltage Protectors with External pFET

General Description The MAX4923–MAX4926 overvoltage protection (OVP) controllers protect low-voltage systems against high-voltage faults of up to +28V with an appropriate external pFET. When the input voltage exceeds the overvoltage lockout (OVLO) threshold, or falls below the undervoltage lockou

文件：202.31 Kbytes 页数：7 Pages

Maxim

美信

Overvoltage Protectors with External pFET

General Description The MAX4923–MAX4926 overvoltage protection (OVP) controllers protect low-voltage systems against high-voltage faults of up to +28V with an appropriate external pFET. When the input voltage exceeds the overvoltage lockout (OVLO) threshold, or falls below the undervoltage lockou

文件：202.31 Kbytes 页数：7 Pages

Maxim

美信

Overvoltage Protectors with External pFET

General Description The MAX4923–MAX4926 overvoltage protection (OVP) controllers protect low-voltage systems against high-voltage faults of up to +28V with an appropriate external pFET. When the input voltage exceeds the overvoltage lockout (OVLO) threshold, or falls below the undervoltage lockou

文件：202.31 Kbytes 页数：7 Pages

Maxim

美信

Overvoltage Protectors with External pFET

General Description The MAX4923–MAX4926 overvoltage protection (OVP) controllers protect low-voltage systems against high-voltage faults of up to +28V with an appropriate external pFET. When the input voltage exceeds the overvoltage lockout (OVLO) threshold, or falls below the undervoltage lockou

文件：202.31 Kbytes 页数：7 Pages

Maxim

美信

Overvoltage Protectors with External pFET

General Description The MAX4923–MAX4926 overvoltage protection (OVP) controllers protect low-voltage systems against high-voltage faults of up to +28V with an appropriate external pFET. When the input voltage exceeds the overvoltage lockout (OVLO) threshold, or falls below the undervoltage lockou

文件：202.31 Kbytes 页数：7 Pages

Maxim

美信

1000 Base-T, 짹15kV ESD Protection LAN Switch

General Description The MAX4927 meets the needs of high-speed differential switching, including that of Gigabit Ethernet (10/100/1000) Base-T switching as well as LVDS and LVPECL switching. The MAX4927 provides enhanced ESD protection up to ±15kV and excellent high-frequency response, making the

文件：189.04 Kbytes 页数：13 Pages

Maxim

美信

1000 Base-T, 짹15kV ESD Protection LAN Switch

General Description The MAX4927 meets the needs of high-speed differential switching, including that of Gigabit Ethernet (10/100/1000) Base-T switching as well as LVDS and LVPECL switching. The MAX4927 provides enhanced ESD protection up to ±15kV and excellent high-frequency response, making the

文件：189.04 Kbytes 页数：13 Pages

Maxim

美信

DisplayPort/PCIe Passive Switches

General Description The MAX4928A/MAX4928B high-speed passive switches route PCI Express® (PCIe) data and/or DisplayPort™ signals between two possible destinations in desktop or laptop PCs. The MAX4928A is intended to be used with the ATX form factor desktop PCs, while the MAX4928B is expected to

文件：148.62 Kbytes 页数：13 Pages

Maxim

美信