Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

文件：585.21 Kbytes 页数：14 Pages

Maxim

美信

故障保护、高电压、单4选1/双2选1多路复用器

MAX4534（单通道4:1）和MAX4535（双通道2:1）故障保护多路复用器采用±4.5V至±20V双电源或+9V至+36V单电源供电。这些多路复用器为输入提供故障保护，具有轨到轨信号处理能力，并在供电轨以上150mV处进行过压箝位。两款器件均在电源关闭时提供±40V过压保护，在电源接通时提供±25V保护。导通电阻最大为400Ω，通道间匹配至10Ω（最大值）。所有数字输入均具有TTL逻辑阈值，确保采用+12V单电源或±15V双电源供电时TTL/CMOS逻辑兼容。\n\n   • 断电时提供±40V故障保护\n\n• 使用±15V电源时提供±25V故障保护\n\n• 无需电源时序控制\n\n• 电源关闭时所有通道断开\n\n• 轨到轨信号处理\n\n• 在故障条件下，输出箝位至适当的电源电压\n\n• 过压期间的输出箝位电阻为1.0kΩ（典型值）\n\n• 最大导通电阻：400Ω\n\n• 20ns（典型值）故障响应时间\n\n• ±4.5V至±20V双电源供电\n\n• +9V至+36V单电源\n\n• TTL/CMOS兼容逻辑输入;

ADI

亚德诺

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

General Description The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto-rail signal-handling capability, and overvoltage clamping at 1

文件：193.27 Kbytes 页数：16 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

General Description The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto-rail signal-handling capability, and overvoltage clamping at 1

文件：193.27 Kbytes 页数：16 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

General Description The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto-rail signal-handling capability, and overvoltage clamping at 1

文件：193.27 Kbytes 页数：16 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

General Description The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto-rail signal-handling capability, and overvoltage clamping at 1

文件：193.27 Kbytes 页数：16 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

General Description The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto-rail signal-handling capability, and overvoltage clamping at 1

文件：193.27 Kbytes 页数：16 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

General Description The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto-rail signal-handling capability, and overvoltage clamping at 1

文件：193.27 Kbytes 页数：16 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

文件：585.21 Kbytes 页数：14 Pages

Maxim

美信

Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

文件：585.21 Kbytes 页数：14 Pages

Maxim

美信